Flash Device Programmer

Product Details:

RT809H EMMC-Nand FLASH Programmer NOR/NAND/EMMC/EC/MCU/ISP High-speed Reading & Writing Car Navigation TV Mobile Phone, Full Support LCD TV FLASH drivers read and write unlimited capacity TSOP48 Nand FLASH EMMC TSOP56 pin TOP8-16 pin Support CAR DVD, SMART TV, The Only universal programmer which can automatically detect chip number for all Chips. The only universal programmer which can put ic in any position and make intelligent sense. The Only universal programmer Support Read and program Laptop I/O via keyboard line. The Only universal programmer Support Read and Program LCD TV VIA VGA and HDMI PORT, the only universal programmer Support ADD new flash by you without wait for factory, The Only universal programmer built in Most of repair applications TV, DVD, DVB, and much ISP software. The Only universal programmer makes self test for LCD TV itself and diagnostic fault. The best programmer to read and programming flash on motherboard without removing out Support Read and Programming OTP area .Support UPTO 64GB NAND FLASH.

PACKING LIST:
1 * RT809H universal programmer.
1 * Original TSOP48 nest
1 * IC Chip Extractor
1 * USB cable
1 * VGA cable
1 * SAS past the nest
1 * SOIC8 - DIP8 adapter ZIF (205mil)
1 * SOP8 - DIP8 adapter (150 mil)
1 * SOP16 150 mil
1 * SOP28 300 mil (also supports SOP20 SOP18 SOP16 300MIL).
1 * PLCC44-DIP40
1 * PLCC32-DIP32
1 * SOP44-DIP44 1.27mm (530mil) Adapter
1 * ISCP board with wire
1 * SOP20 200MIL
1 * SSOP28 to DIP28
1 * TSSOP8 in DIP8
1 * KB9012 board
1 * SOP8 clamp test
1 * TSOP - VSOP - SSOP adapter
2 * IT8587 IT8585E flat cable
1 * ISP Cable
1 * ICSP Cable
1 * RT-SOP-A ISP Cable
1 * FFC Line 200MM 0.5mm-32P
1 * FFC Line 200MM 1.0mm-32P
1 * FPC Base Under 0.5mm-32P
1 * FPC Base Under 1.0mm-32P

Additional Information:

• Item Code: OMP-PR003
• Delivery Time: 1 to 2 days

Product Details:

RT809H EMMC-Nand FLASH Programmer NOR/NAND/EMMC/EC/MCU/ISP High-speed Reading & Writing Car Navigation TV Mobile Phone, Full Support LCD TV FLASH drivers read and write unlimited capacity TSOP48 Nand FLASH EMMC TSOP56 pin
TOP8-16 pin Support CAR DVD, SMART TV, The Only universal programmer which can automatically detect chip number for all Chips. The only universal programmer which can put ic in any position and make intelligent sense. The Only universal programmer Support Read and program Laptop I/O via keyboard line. The Only universal programmer Support Read and Program LCD TV VIA VGA and HDMI PORT, the only universal programmer Support ADD new flash by you without wait for factory, The Only universal programmer built in Most of repair applications TV, DVD, DVB, and much ISP software. The Only universal programmer makes self test for LCD TV itself and diagnostic fault. The best programmer to read and programming flash on motherboard without removing out Support Read and Programming OTP area .Support UPTO 64GB NAND FLASH.
PACKING LIST:
RT809H universal programmer
TSOP56 Adapter RT-TSOP56-A V1.1
original TSOP48 nest
IC Chip Extractor
usb cable
vga cable
sas past the nest.
SOIC8 – DIP8 adapter ZIF (205mil)
SOP8 – DIP8 adapter (150 mil)
SOP16 150 mil
SOP28 300 mil (also supports SOP20 SOP18 SOP16 300MIL).
SOP16-DIP16 Socket
SOP44-DIP44 1.27mm (530mil) Adapter
PLCC44-DIP40
PLCC32-DIP32
PLCC28-DIP24
PLCC20-DIP20
ISCP board with wire
SOP20 200MIL
SSOP28 to DIP28
TSSOP8 in DIP8
KB9012 board
SOP8 clamp test
TSOP – VSOP – SSOP adapter
2 * IT8587 IT8585E flat cable
EC NPEC288 NPEC388 PCB Board
EC SOP28-DIP28 PCB Board
SOP8/MSOP8/SSOP8/SOP16-DIP16 simple adapter
Adapter SOP8-DIP8 simples
1.8V Conversion Block 25 series low voltage chip adapter
ISP Cable
ICSP Cable
RT-SOP-A ISP Cable
Suction Pen
LCD LED screen EDID code
FFC Line 200MM 0.5mm-32P
FFC Line 200MM 1.0mm-32P
FPC Base Under 0.5mm-32P
FPC Base Under 1.0mm-32P

Additional Information:

• Item Code: OMP-PR019
• Delivery Time: 1 To 2 DAYS

Product Details:

DESCRIPTION

Support 24 EEPROM and 25 SPI flash 8pin/16pin chip
USB to TTL port, can get root online
With CH341A chip
Recognize 25 series chip automatically
And support download STC series procedure of single chip
With 24/25 status indicator lamp
SPI pin to support expanding the utility

USE:- SOIC8 CLIP SOP8 To DIP8 USED for RT809F Programmer, RT809H Programmer,TNM5000 Programmer,TL866II Programmer, EZP2013 Programmer, EZP2010 Programmer, EZP2013 Programmer.

Product Details:

TNM7000 Universal Programmer

• Supporting more than 25000 new devices
• Automatic device identification
• Digital IC tester
• Fast 48pin zif programming up to 15MB/s
• Supporting windows xp/vista/7/8/10 (32bit-64bit)
• ISP &JTAG connector
• USB2 high speed
• USB powered
• Gang option

Microcontrollers:

ATMEL: All AVR 8 bits chips (ATMEGA/ATTINY/AT90S/ATXMEGA) are supported on ZIF Socket & by ISP cable. High Voltage Parallel on ZIF Programming of AVR up to 64 pins is supported. Newly introduced ATXMEGA Series are supported by both PDI & JTAG Method. Old C51 series & new single cycle C51 series are completely supported. All the above series can be detected automatically by TNM7000. ARM7 programming by JTAG is supported.

Infineon: Tricore Chips by CAN boot loader, XC164x, XC23xx (air bag and ABS).

ST: STM32F ARM chips by SWD connector, ST10Fxx, SPC56xx series, 72Fxxx

Microchip: One of the most complete device lists for microchip PIC microcontrollers including all PIC12F /PIC12C /PIC16C / PIC16F / PIC18F / DPIC33F / J & K Series. Devices up to 40 Pins can be programmed on ZIF; All PICs can be detected automatically & programmed by ISP cable.

Others:  SST, Philips (NXP), Motorola, Syncmos, Silicon Lab, ICSI, Intel, HOLTEK, Winbond & …

Motherboard IOs: ENE /ITE / Nuvoton IO chip support by Keyboard cable.

VGA / HDMI cable LCD / TV programming: Weltrend, Realtek, Novatek, MST (external EEPROM/Flash).

Software: With multiple language support (English / Chinese / Russian /polska /Arabic / French /FARSI). More languages & Devices  can be added by customer request. You Can Download Software & run it in Demo mode to evaluate it.

Package Includes:

1PC TNM 7000 Universal Programmer

1PC USB Cable (for both power supply and data communication)

1PC AC/DC Adapter

1PC Installation CD

1PC ISP cable

Additional Information:

• Item Code: OMP-PR060
• Delivery Time: 1 TO 2 DAYS

Product Details:

Hardware Features
Fast USB 3.0 high-speed mode (+USB 2.0 compatibility)
UFS data transfer speed 55 MB/s (writing) / 100 MB/s (reading) and more
depends on PWM/HS working mode and flash storage speed
1-bit, 4-bit and 8-bit MMC buses supported (40 MB/s and more)
speed depends on bus width and flash storage speed
In System Programming (ISP) now possible for MMC and UFS flash memory types
without desoldering, if there is a technical capability to solder by means of PIN-CONNECTOR expansion board
All output voltages (VCC, VCCQ, VCCQ2) regulation within operation range 1.2…3.3V
Software Features
Full-featured professional software
Supports all operations (Read, Write and Edit) with any required memory partition via UFS, MMC, and USB interfaces.
Service operations with UFS memory
Divide flash memory into LUN units
Work with descriptors, attributes, flags
Write OEM ID
Erase memory on all active LUN
Read RPMB Counter
Service operation with MMC flash memory
Edit: geometry, partitions, CID, CSD and other data registers
Restore/Update flash memory firmware
Read/View Extended CSD registers
Format flash memory
Simple intuitive GUI interface suitable for both beginners and experts
Quick device restoration by means of SRF files
SRF files contain partition data as well as other useful information (help files and diagrams)
SRF data are compressed (to increase performance)
Built-in Partition Manager
Partition Manager allows you to edit the required partitions and save changes thus improving user experience. Plus, you will be able to open Full Flash binary files, edit the file content and save the edited file back on the device.
Simple operation for each partition separately (Read, Write, Erase, Edit) on the specific storage devices
Built-in Smart-Repair-File Constructor with Partition Manager for creating your own SRF files
SRF file can be taken from the device or read from Full Flash binary file. This functionality allows user (without developer’s assistance) add devices to the list of supported models, which are not officially supported yet. User can upload the custom SRF file into separate section of Support Zone and submit it for further analysis of the developers. If this custom SRF file is considered legitimate and correct, name (or nickname) of the author will be credited within the next update. Thus, user has the opportunity to participate in the development of Medusa PRO II and become known in certain circles.
Built-in Download Manager allows you to download files directly from the software
Devices with NAND, OneNAND and eMMC memory types are supported via USB interface
Devices with eMMC memory type are supported via MMC interface

Additional Information:

• Item Code: OMP-PR132
• Delivery Time: 1 To 2 days

Product Details:

Full Support LCD TV FLASH drivers read and write unlimited capacity TSOP48 nand FLASH EMMC TSOP56 pin TOP8-16 pin Support CAR DVD, SMART TV.
The Only universal programmer which can automatically detect chip number for all Chips.
The Only universal programmer Support Read and program Laptop I/O via keyboard line.
The Only universal programmer Support Read and Program LCD TV VIA VGA and HDMI PORT.
The Only universal programmer Support ADD new flash by yourself without wait for factory.
The Only universal programmer built in Most of repair applications TV,DVD,DVB,and many isp software.
The Only universal programmer make selftest for LCD TV itself and diagnostic fault.
The best programmer to read and programing flash on motherboard without removing out
Support Read and Programming OTP area .
Support UPTO 64GB NAND FLASH
Short description:
· 48-pins powerful pindrivers, no adapter required for any DIL devices
· ISP connector for in-circuit programming
· VGA port to read and write LCD TV-MONITORS without disassembly .
· HDMI port to read and write LCD TV-MONITORS without disassembly .
· Support Auto select for any series of flash including TSOP48-NAND-EMMC-PLCC,,ETC however Programmer is driven by an easy-to-use control program with pull-down menu, hot keys and on-line help. Selecting of device is performed by its class, by manufacturer or simply by typing a fragment of vendor name and/or part number.

Packing List:
1 * RT809H universal programmer
1 * RT-BGA48-01 V2.0 EMMC NW267 BGA63 0.8mm Adapter
1 * RT-BGA63-01 V2.0 EMMC NW267 BGA63 0.8mm Adapter
1 * RT-BGA64-01 1.0mm spacing frame 11*13mm special EMMC Adapter
1 * RT-BGA169-01 EMMC seat EMCP153 EMCP169 Adapter + Limit frame
1 * TSOP56 Adapter RT-TSOP56-A V1.1
1 * TSOP48 Adapter
1 * SOP44-DIP44 1.27mm (530mil) Adaptador
1 * SOP28-DIP28 (300mil) Adaptador
1 * SOP20-DIP20 (300mil) Adaptador
1 * SOP16-DIP16 (300mil) Adaptador
1 * Double SOP8-DIP16 CNV-SOP20 (208mil) Adaptador
1 * SOP8-DIP8 CNV-SOP20 (208mil) Adaptador
1 * SOP20-DIP20 CNV-SOP20 (208mil) Adaptador
1 * SOP8-DIP8 CNV-SOP-DIP16 (150mil) Adaptador
1 * SOP16-DIP16 CNV-SOP-DIP16 (150mil) Adaptador
1 * PLCC44-DIP44
1 * PLCC44-DIP40
1 * PLCC32-DIP32
1 * PLCC28-DIP28
1 * PLCC28-DIP24
1 * PLCC20-DIP20
1 * SSOP28 to DIP28
1 * TSSOP8 to DIP8
1 * KB9012 board
1 * SOP8 IC Clip
1 * TSOP-VSOP-SSOP adapter
1 * ITE 29/39/49/50 series 32/40/48 feet adapter
1 * Multipurpose ISP-DuPont-Header Adapter
1 * EC NPEC288 NPEC388 PCB Board
1 * TSOP28Pin 0.65mm Adapter Board
1 * SOP28Pin 1.27mm Adapter Board
1 * TSOP20Pin 0.65mm Adapter Board
1 * SOP20Pin 1.27mm Adapter Board
1 * TSOP16Pin 0.65mm Adapter Board
1 * SOP16Pin 1.27mm Adapter Board
1 * TSOP14Pin 0.65mm Adapter Board
1 * SOP14Pin 1.27mm Adapter Board
1 * TSOP10Pin 0.65mm Adapter Board
1 * SOP10Pin 1.27mm Adapter Board
1 * TSOP8Pin 0.65mm Adapter Board
1 * SOP8Pin 1.27mm Adapter Board
1 * QFN8-DIP8 Programador Adaptador WSON8-DIP8 8x6mm 6x5mm
1 * SOP8/MSOP8/SSOP8/SOP16-DIP16 simple adaptador
1 * Adaptador SOP8-DIP8 simples
1 * 1.8V Conversion Block 25 series low voltage chip adapter
2 * ISP Cable
1 * ICSP Cable
1 * RT-SOP-A ISP Cable
1 * LCD LED screen EDID Cable
1 * IC Chip Extractor
1 * Suction Pen
1 * USB Cable
1 * VGA Cable
1 * FFC Line 200MM 0.5mm-32P
1 * FFC Line 200MM 1.0mm-32P
1 * FPC Base Under 0.5mm-32P
1 * FPC Base Under 1.0mm-32P
1 * Anti-Static Wristband Wrist Strap Band ESD Discharge PC Electricity Grounding
1 * VGA to HDMI Line Cable (It is suitable for reading and writing of TV without VGA interface Note: Use for TV HDMI port with TX/RX function only)

Additional Information:

• Item Code: OMP-PR095
• Delivery Time: 1 TO 2 DAYS