DS3231 is a low-cost, extremely accurate I2C real-time clock (RTC), with an integrated temperature-compensated crystal oscillator (TCXO) and crystal. The device incorporates a battery input, disconnects the main power supply and maintains accurate timekeeping. Integrated oscillator improves long-term accuracy of the device and reduces the number of components of the production line
RTC maintains seconds, minutes, hours, day, date, month, and year information. Less than 31 days of the month, the end date will be automatically adjusted, including corrections for leap year. The clock operates in either the 24 hours or band AM PM indication of the 12-hour format. Provides two configurable alarm clock and a calendar can be set to a square wave output. Address and data are transferred serially through an I2C bidirectional bus.
A precision temperature-compensated voltage reference and comparator circuit monitors the status of VCC to detect power failures, provide a reset output, and if necessary, automatically switch to the backup power supply. In addition, RST pin is monitored as generating P reset manually.
Save time and high precision addition, DS3231 also has some other features that extend the system host of additional features and a range of options. The device integrates a very precise digital temperature sensor, through the I2C interface to access it (as the same time). This temperature sensor accuracy is ± 3 ° C. On-chip power supply control circuit can automatically detect and manage the main and standby power (i.e., low-voltage battery) to switch between the power supply. If the main power failure, the device can continue to provide accurate timing and temperature, performance is not affected. When the main power re-power or voltage value returns to within the allowable range, the on-chip reset function can be used to restart the system microprocessor.
Size 38mm (length) 22mm (W) 14mm (height),Weight 8g,Operating voltage 3.3 - 5 .5 V, Clock chip high-precision clock chip DS3231,Clock Accuracy 0-40 range, the accuracy 2ppm, the error was about 1 minute, Calendar alarm clock with two, Programmable square-wave output, Real time clock generator seconds, minutes, hours, day, date, month and year timing and provide valid until the year 2100 leap year compensation, Chip temperature sensor comes with an accuracy of ± 3,memory chips AT24C32 (storage capacity 32K),IIC bus interface, the maximum transmission speed of 400KHz (working voltage of 5V),can be cascaded with other IIC device, 24C32 addresses can be shorted A0A1A2 modify default address is 0x57
With rechargeable battery LIR2032, to ensure the system after power failure, the clock moves any natural normal.
|Minimum Order Quantity||1 Piece|
Along with the DS1307 real time clock, the module also has an Atmel 24C32 EEPROM chip which is handy for storing data without worrying about power loss.
DS1307 I2C real time clock chip (RTC)
24C32 32K I2C EEPROM memory
Using CR2032 lithium battery
Other I2C devices can be cascaded
Leads to the DS1307 clock pin provides a clock signal for the microcontroller
Supports LIR2032 rechargeable lithium battery, and with a charging circuit to charge the battery (not included)
Real-Time Clock Counts Seconds, Minutes, Hours, Date of the Month, Month, Day of the Week, and Year with Leap-Year Compensation Valid Up to 2100
Serial I/O for Minimum Pin Count
2.0V to 5.5V Full Operation
Uses Less than 300nA at 2.0V
Single-Byte or Multiple-Byte (Burst Mode) Data Transfer for Read or Write of Clock or RAM Data