Robotics Accessories & Kits

Product Details:

4WD Smart Robot Car Chassis Kits for Arduino

FEATURES:-

The height between two chassis can be change by different copper pillar 20 line Speed Encoder.
Package included:
2 x Smart car chassis (Acrylic),
4 x DC gear motor (strong magnet testing by EMC)
4 x 20 line speed encoder
4 x Tyre ,8 x Fastener Some screw nut and copper pillar

Additional Information:

• Item Code: OMP-M010
• Port of Dispatch: Mumbai

Product Details:

Smart Robot Car Chassis Kit Speed Encoder Battery Box for Arduino, Smart car chassis tracing car Robot car chassis with code disk Ideal for DIY Mechanical structure. It is very simple to install this car is the tachometer encoder with a 4 AA battery box and power switch (batteries not provided). Motor power supply is 6V 9V. The car Chassis is transparent- you need to remove protective paper.

APPLICATION

Can be used for distance measurement, obstacle avoidance, distance testing, and speed testing, wireless remote control robot cars

PACKAGE INCLUDED:

1 x Car chassis

2 x Gear motor

2 x Car tire

2 x Speed encoder

2 x Fastener

1 x Universal wheel

1 x Screwdriver

1 x Battery box (batteries not provided)

All necessary screw and nut

Additional Information:

• Item Code: OMP-M011
• Port of Dispatch: Mumbai

Product Details:

This breadboard is great for high frequency and low noise circuits. Interconnect any components with 20-29 AWG (0.3-0.8) wire.

Features:

400 tie-point solderless breadboard, housing, metal clips.

Perfect for shield prototyping and testing.

Suitable for high frequency and low noise circuits.

Interconnect any components with 20-29AWG (0.3-0.8) wire.

1 terminal strip, tie-point 300; 2 distribution strips, tie-point 100.

With double faced adhesive tape at the back.

Specifications:

Material: PCB

Points Quantity: 400

Each Breadboard Size: 8.2 * 5.5 * 0.8cm / 3.2 * 2.2 * 0.3in

Each Breadboard Weight: 37g / 1.3oz

Package Size: 14.5 * 8 * 2.5cm / 5.7 * 3.1 * 1in

Package Weight: 92g / 3.2oz

Package List:

1 * Solderless Breadboard

Additional Information:

• Item Code: OMP-M103
• Delivery Time: 1 to 2 Days

Product Details:

This Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the amplifier to your microcontroller you will be able to read the changes in the resistance of the load cell and with some calibration you'll be able to get very accurate weight measurements. This can be handy for creating your own industrial scale, process control, or simple presence detection. The HX711 uses a two wire interface (Clock and Data) for communication. Any microcontroller's GPIO pins should work and numerous libraries have been written making it easy to read data from the HX711. Check the hookup guide below for more information. Connection for Wheatstone bridge to connect to the HX711, These are commonly colored Red, Black, White, Green. Each color corresponds to the conventional color coding of load cells: Red (Excitation+ or VCC), Black (Excitation- or GND), White (Amplifier+, Signal+, or Output+), and Green (A-, S-, or O-)

FEATURES:

Operation Voltage: 2.7V-5V

Operation Current: < 1.5mA

Selectable 10SPS or 80SPS output data rate

Additional Information:

• Item Code: OMP-M056

Product Details:

• Item Name: Rocker Switch; Type: On/Off/On (DPDT),Momentary
• Terminals: 6 Pin; Voltage & Current: AC 10A/250V, AC 15A/125V
• Overall Size: 34 x 25 x 32mm / 1.2" x 0.94" x 1.1"(L*W*T); Mounting Hole Size: 29 x 21.4mm / 1.1" x 0.8"(L*W)
• Color: Black; Material: Plastic, Metal
• Total Net Weight: 14g; Package Content: 1 x Rocker Switch

Product Details:

Parameter:
Core processor: ARM ® Cortex ™-M3
Core Size: 32bit
Processor speed: 72MHz
Input / Output: 37
Program Memory capacity: 64KB (64K x 8)
Program Memory Type: Flash
Voltage - Power supply: (Vcc / Vdd) 2 V ~ 3.6 V
Data Converters: A / D 10x12b
Oscillator Type: External, Internal
Operating temperature: -40 ° C ~ 85 ° C
Package / Case :48-LQFP
Input / Output lines: 32

Product Details:

We have made a selection of the 15 best 3D pens for all 3D printing enthusiasts: children, fans and artists. They all cater to different levels because there is a 3D pen no matter your age or skill level.

Product Details:

Arduino Uno Kit Starter Kit,
RFID Learning Suite including:
1pcs High Quality Retail Box
1pcs Components Introduction Paper
1pcs UNO R3
1pcs USB Cable
1pcs 65 Jumper WiRes
1pcs 830 Point BREADBOARD1
5pcs led (Red, Green, Yellow)
30pcs Resistance(220R, 10K, 1K)
1pcs 10 Pin Dupont Line(Male to Female)
1pcs Potentiometer
1pcs Active Buzzer
1pcs Passive Buzzer
1pcs 74HC595N
1pcs Infrared Receiving Head
1pcs LM35DZ
1pcs Flame Sensor
2pcs Roll Ball Switch
3pcs 5mm LDR
5pcs Button Switch with Cap
1pcs IR Remote Control
1pcs One Digital Tube
1pcs Four Digital Tube
1pcs 8*8 Dot Matrix Tube
1pcs UNL2003 Driver Board
1pcs 5V Stepper Motor
1pcs SG90
1pcs LCD1602 IIC I2C
1pcs PS2 Game Joystick Module
1pcs DHT11 Temperature and Humidity Sensor Module
1pcs Water level measurement module
1pcs RFID module
1pcs RFID key ring
1pcs RFID card
1pcs sound sensor module
1pcs one road relay module
1pcs RTC module
1pcs 16 buttons matrix keyboard module
1pcs RGB three color module
1pcs 9V Battery Connector

Additional Information:

• Item Code: OMP-M016

Product Details:

PRODUCT DETAILS

 Voltage: DC 3V

 Working current: < 40mA

 Input power: 150Mw

 Working temperature: -36~65’C

 Wavelength: 650nm

 Output laser power: < 5mW

 Cable length: 4.6cm

 Dimensions: 2.36 in x 0.24 in x 0.24 

 Weight: 0.18 oz (5 g)

 APPLICATIONS

 Perfect for DIY project

Additional Information:

• Item Code: OMP-M111
• Delivery Time: 1 to 2 Days

Product Details:

This is a Dual-Axis XY Joystick Module that has X, Y analog outputs and has a switch that detects a button press. The joystick is made up of two passive potentiometers (variable resistors) and a push button and therefore can be used at any standard voltage levels.

Additional Information:

• Item Code: OMP-M022
• Delivery Time: 2 to 3 days After Dispatch

Product Details:

The rated working voltage is 2.5V - 5V, and the limit working voltage is 5.5V.
Ultra Mini Size: 21 x 18 x 3.4mm(L x W x H). Various digital products can be easily placed in a small space for efficient amplification; double-sided wiring can properly solve the wiring caused by potential balance and crosstalk between channels
Two-channel stereo, 5V power supply can output 3W+3W power, can directly drive 4Ω, 8Ω small speakers, the output power is large, the energy is sufficient, and the sound quality is good.
Excellent noise suppression, no audio input with ears close to speakers, no noise can be heard; unique Class D digital powerless board with LC filter can be powered directly from the computer's USB.
For any DIY design that requires a miniature audio amplifier, especially battery powered portable and mobile applications.

Colour:green
Material:ABS

Package Contents:
1 x Digital Power Amplifier Board

Product Details:

PRODUCT DETAILS

A microSD card reader and writer with included 3.3V regulator and level shifters making safe to interface with most 5V and 3.3V microcontrollers, including the Arduino Uno, Leonardo, Mega, Due, etc.

The module (Micro SD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the Micro SD card read and write files.

Users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write.

OTHER DETAILS

Supply voltage: 5V-15V

Build in logic lever converter

Interface: SPI

Mounting holes: 2, 2 mm

Size: 46 x 24 x 7 mm

FEATURES

Simple breakout board with extremely small form factor.

Automatic 5V to 3.3V power conversion and logic translation.

Easy interface to any micro-controller with SPI bus support and Fast SPI protocol operation.

APPLICATION

Data logging/Time Stamping

File storage and operations

Music or sound

High data volume operations

I/O Read/Write Streaming

Additional Information:

• Item Code: OMP-M115
• Delivery Time: 1 to 2 Days

Product Details:

PRODUCT DETAILS

DPDT switch box in plastic for mounting 2 numbers of the rocker-type DPDT switches.The switch box is a combo of 2 switch compatible box used to control appliances or robots.

OTHER DETAILS

Cutting: For 2 switches.

Width: 10 cm.

Height: 6 cm.

Depth: 4 cm.

APPLICATIONS

PIC based robotics projects.

ARM based robotics projects.

Arduino based robotics projects.

Raspberry-pi based robotics projects.

Additional Information:

• Item Code: OMP-M120
• Delivery Time: 1 to 2 Days

Product Details:

• This is a commonly used DC motor drive module, using a small current 293 chip DC motor driver chip.
• Using this chip you can use DC motors and power supplies of up to 10 Volts, that some pretty big motors and the chip can supply a maximum current of 600mA per channel.
• Tested compatible for Arduino Mega, Diecimila & Duemilanove.
• 2 interface for 5V Servo connected to the Arduino's high-resolution dedicated timer - no jitter.
• Multi-function, easy to operate, a strong driver library support and feature updates.

Product Details:

• Using L298N made by ST company as the control chip,the module has such characteristics as strong driving ability,low calorific value and strong anti-interference ability.
• This module can use built-in 78M05 for electric work via a driving power supply part.But to avoid the damage of the voltage stabilizing chip,please use an external 5V logic supply when using more than 12V driving voltage.
• Using large capacity filter capacitor,this module can follow current to protect diodes,and improve the reliability.
• Dual-channel H-bridge driver working mode creates higher working efficiency
• To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage

Additional Information:

• Item Code: OMP-M015