Raspberry Pi 3 Boards, Cameras & Accessories

Product Details:

DESCRIPTION:-

Raspberry Pi Camera Module 5MP is capable of 1080p video and still images and connects to the Raspberry Pi. The offered connection included ribbon cable to the CSI (Camera Serial Interface) port on the Raspberry Pi. This 5mp camera module is capable of 1080p video and still images and connects directly to your Raspberry Pi.

TECHNICAL SPECIFICATION:-

5MP sensor

Picture Resolution: 2592 x 1944

1080p video supported

Size: 25 x 20 x 9 mm

CSI (Camera Serial Interface)

Quick connect

Size: 20 x 25 x 9mm

Weight 3g

Additional Information:

• Item Code: OMP-R004
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Port of Dispatch: Mumbai

Product Details:

DESCRIPTION

Raspberry Pi 3 models B, Broadcom have supported us with a new SoC, BCM2837. This retains the same basic architecture as its predecessors BCM2835 and BCM2836, so all those projects and tutorials which rely on the precise details of the Raspberry Pi hardware will continue to work. The 900MHz 32-bit quad-core ARM Cortex-A7 CPU complex has been replaced by a custom-hardened 1.2GHz 64-bit quad-core ARM Cortex-A53. Combining a 33% increase in clock speed with various architectural enhancements, this provides a 50-60% increase in performance in 32-bit mode versus Raspberry Pi 2, or roughly a factor of ten over the original Raspberry Pi.

TECHNICAL SPECIFICATIONS

4 x USB 2 ports

40pin extended GPIO

BCM43438 Wi-Fi on board

Bluetooth Low Energy (BLE) on board

4 pole Stereo output and Composite video port

Full size HDMI CSI camera port for connecting the Raspberry Pi camera

DSI display port for connecting the Raspberry Pi touch screen display

Micro SD port for loading your operating system and storing data

Upgraded switched Micro USB power source (now supports up to 2.4 Amps)

Same form factor as the Pi 2 Model B, however the LEDs have changed position

Broadcom BCM2837 64bit Quad Core Processor powered Single Board Computer running at 1.2GHz 1GB RAM.

Additional Information:

• Item Code: OMP-R006

Product Details:

FEATURES:

5inch standard display,

Screen Type: capacitive screen

800 x 480 HD resolutions

Working Voltage/Current: DC 5V / 2A

Support backlight control alone, can turn off backlight to save power

Supports standard HDMI interface input, compatible and can be directly inserted into raspberry pie (3 generation, 2 generation, 1 generation)

Can be used as a general-purpose HDMI display, such as access to the computer HDMI as a secondary display (resolution output can be adjusted to 800X480)

If used only as a display, no need to take up IO resources

Dimensions: 121.11*77.93mm

It's suitable for Raspberry pi series; and also supports banana pi, pcduino or Cubieboard etc.

Additional Information:

• Item Code: OMP-R003
• Delivery Time: 2 to 3 days After Dispatch

Product Details:

DESCRIPTION

With our in-depth knowledge and experience of this industry, we are engaged in providing an excellent range of 7 Inch LCD Capacitive HDMI Touchscreen Raspberry Pi that supports Banana Pi / Banana Pro, comes with Lubuntu, Raspbian images. Also, this 7 Inch LCD Capacitive HDMI Touchscreen Raspberry Pi is having HDMI interface for displaying, USB interface for touch control. We offer the entire range at pocket-friendly prices and within promised time-frame.

Technical Specification:-

• 800×480 high resolution
• Supports Raspberry Pi
• Capacitive touch control
• Supports BB Black, comes with Angstrom image
• Supports Banana Pi / Banana Pro, comes with Lubuntu, Raspbian images
• For other mini-PCs, driver is required and should be developed by users
• Not only for mini-PCs, can it work as a computer monitor just like any other general HDMI screen
• HDMI interface for displaying, USB interface for touch control
• Backlight control to lower power consumption

REVISIONS UNDER REV2.1:

• For the Raspberry Pi, comes with Raspbian driver (works with your Raspbian directly), and Ubuntu image
• When work as a computer monitor, touch function is unavailable.

POINTS TO REMEMBER:

• Drivers can be added to your current system to support LCD display and touch control.
• Images cannot is used with your current system. They're stand-alone systems which support LCD display and touch control already.

Additional Information:

• Item Code: OMP-R001
• Port of Dispatch: Mumbai

Product Details:

Owing to perfection and quality oriented approach, we have carved niche in the industry by offering 3.2 inch Touch Screen TFT LCD for Raspberry PI that also has a resistive touchscreen and a stylus. This is always one of the coolest things that you can add to a Raspberry Pi. This 3.2 inch Touch Screen TFT LCD for Raspberry PI supports any revision of Raspberry Pi (directly-pluggable). This can also take photos by touching (up to 17 camera modes). Our clients can easily avail the entire range at market leading prices.

DESCRIPTION :

• LCD Type: TFT
• LCD Interface: SPI
• Touch Screen Type: Resistive
• Touch Screen Controller: XPT2046
• Colors: 65536
• Backlight: LED
• Resolution: 320x240 (Pixel)
• Aspect Ratio: 4:3
• Power Consumption: TBD
• Backlight Current: TBD
• Operating Temp. (^oC): TBD

Additional Information:

• Item Code: OMP-R010
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Port of Dispatch: Mumbai

Product Details:

DESCRIPTION-

Model: - Raspberry Pi 3 B+

Processor: - Broadcom BCM2837BO, Cortex-A53 64-bit SoC @ 1.4 GHz

Memory: - 1 GB LPDDR2 SDRAM

Wi-Fi: - 2.4gGHz and 5GHz IEEE802.11b/g/n Wireless LAN

Bluetooth 4.2, BLE

Ethernet 300 Mbps

USB Port USB 2.0 ports 4pcs

IO Port:-Extended 40-pin GPIO header

Video & Sound

1x full size HDMI,

MIPI DST display port,

MIPI CST display port,

4 pole stereo output and composite video port

Multimedia

H.264, MPEG-4 decode (1080 p30)

H.264, decode (1080 p30)

OpenGL ES 1.1, 2.0 graphics

SD card support Micro SD format for loading operating system and data storage

Input power:-5V/2.5A DC via micro USB connector 5V DC via GPIO header Power over Ethernet (POE):- Enabled (requires separate PoE HAT)

Environment: - - 0-50 DegreeC

Additional Information:

• Item Code: OMP-R018
• Delivery Time: 1 to 2 days

Product Details:

TECHNICAL SPECIFICATION

Resolution: 800 x 480 PX

Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable).

HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os).

Screen Type: Resistive screen

With backlight control switch

Working Voltage/Current: DC 5V / 2A

High quality immersion gold surface plating

Not only the Pi, can you also use it with any other Mini-PCs like Cubieboard

Additional Information:

• Item Code: OMP-R021

Product Details:

TECHNICAL SPECIFICATION

High-Definition video camera for Raspberry Pi Model A/B/B+ and Raspberry Pi 2

Omnivision OV5647 sensor in a fixed-focus module with replaceable Lens

Lens holder: CS mounts

5MPixel sensor

Integral IR filter

Still picture resolution: 2592 x 1944

Max video resolution: 1080p

Max frame rate: 30fps

Support FREX/ STROBE feature

Size: 36 x 36 mm

15 cm flat ribbon cable to 15-pin MIPI Camera Serial Interface (CSI) connector

The Camera Lens for Raspberry Pi Camera Board is LS-2717CS

Additional Information:

• Item Code: OMP-R011
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Port of Dispatch: Mumbai

DESCRIPTION:-

Raspberry Pi Model B Expansion / Evaluation Board is an expansion board designed for Raspberry Pi Model B+, integrates various components and interfaces for connecting external accessory boards. It's ideal for Raspberry Pi Model B+ evaluation and development.

TECHNICAL SPECIFICATION: -

User LEDs

User Keys

RTC jumper

CP2102 jumper

Power indicator

User LEDs jumper

User Keys jumper

RTC battery holder

PCF8563: onboard RTC chip

32.768K crystal: RTC crystal

Pin headers for connecting with the Raspberry Pi

Potentiometer: for LCD1602 contrast adjustment

CP2102: onboard USB TO UART chip, for debugging

Character LCD interface: for connecting character LCDs like LCD1602

USB connector: USB TO UART, supported by onboard converter CP2102

UART interface: easily connects to UART modules such as RS232, RS485, USB TO UART, etc.

SPI interface: easily connects to SPI modules such as AT45DBXX Data flash, L3G4200D Board, etc.

I2C interface: easily connects to I2C modules such as PCF8574 Expansion Board, PCF8563 RTC Board LSM303DLHC Board, etc.

8I/Os interface: easily connects to modules controlled by I/Os, such as 8 Push Buttons, Logic Level Converter, Mix Board, etc.

Additional Information:

• Item Code: OMP-R005
• Minimum Order Quantity: 1 Piece
• Port of Dispatch: Mumbai

Product Details:

PRODUCT DETAILS

The Raspberry Pi Zero W is still the Pi you know and love, but at a largely reduced size of only 65mm long by 30mm wide and at a very economical price. With the addition of wireless LAN and Bluetooth, the Raspberry Pi Zero W is ideal for making embedded Internet of Things (IoT) projects. The Pi Zero W has been designed to be as flexible and compact as possible with mini connectors and an unpopulated 40-pin GPIO, allowing you to use only what your project requires.

SPECIFICATIONS

1GHz, Single-core CPU

512MB RAM Composite video and reset headers

Mini-HDMI port

Micro-USB OTG port

Micro-USB power

HAT-compatible 40-pin header

CSI camera connector (v1.3 only)

Bluetooth 4.1

Bluetooth Low Energy (BLE)

802.11 b/g/n wireless LAN

Additional Information:

• Item Code: OMP-R019
• Delivery Time: 1 to 2 Days

Product Details:

PRODUCT DETAILS

It’s an open-source single-board computer. It can run Android 5.1, Ubuntu, Debian image. It uses the AllWinner H5 SoC, and has 512MB DDR3 SDRAM.

Orange Pi Zero Plus is for anyone who wants to start creating with technology – not just consuming it. It's a simple, fun, useful tool that you can use to start taking control of the world around you.

SPECIFICATIONS

SoC Allwinner ARM Cortex-A7 H5 quad-core at 1.2GHz

GPU Mali400MP2

512MB of DDR3 memory

1x OTG micro-USB connector for power supply

Connectivity: WiFi b/g/n (RTL8189FTV)

1x HDMI port

1x SD card reader up to 64GB

1x 26-pin GPIO connector not compatible with Raspberry Pi

1x serial port for debug and system installation without keyboard or mouse

1x 13-pin connector to add

2x USB 2.0 ports

1x TV out

1x audio output

1x microphone

1x Infrared Receiver

Additional Information:

• Item Code: OMP-R022
• Delivery Time: 1 to 2 Days

Product Details:

PRODUCT DETAILS

ARM Cortex-A5 32bit Bluetooth, Support ubuntu linux and android mini PC Beyond Raspberry Pi 2UPC.

When it comes about the release of quality development boards, the Orange Pi boards seem dominating the Raspberry Pi. Each of the Orange Pi boards seems to give a tough time to the Raspberry Pi on One-on-One basis. The Orange Pi 2G-loTcan obviously be seen countering the Raspberry Pi Zero. The board features a Sim card slot along with the Wi-Fi and Bluetooth connectivity.

SPECIFICATIONS

(Cortex-A5) ARM 32-bit

Features a GC860 graphics processor (Independent)

Supports Open (VG1.4) and Open (GLES1.1/2.0)

Features an additional support especially for (GDI/DirectShow & DirectFB)

Configuration support of (250M) Pixels and (30M) Triangle(s)

Integrated (256MB) SDRAM (LPDDR2)

Onboard storage support for TF card (512MB integrated), 1.8V 4K SLC NAND Flash

Onboard Wi-Fi + BT (RDA5991)

One slot for SIM Card

(GSM/GPRS) Dedicated accelerators

(CSI) camera connector

(30) frames/second along with (Video) input support up to (1080pixels) resolution

5mm (Jack) and (MIC) support for audio input

Support (LED) video output

Supports SPEAK, FM, and (3.5mm) Jack for audio output

Supporting for both (Battery power supply) that is optional and (USB OTG) power supply (Good sign! Majority of the (Orange Pi boards) usually support only one power supply)

Raspberry Pi B+ Compatible through 40 Pin Header

Having compatibility with Android, Debian, Ubuntu and Raspbian Image

Additional Information:

• Item Code: OMP-R023
• Delivery Time: 1 to 2 Days