Arduino Boards

Product Details:

The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button. The board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it with an AC-to-DC adapter or battery to get started. The Arduino Due can be powered via the USB connector or with an external power supply. The power source is selected automatically.

It is possible to erase the Flash memory of the SAM3X with the onboard erase button. This will remove the currently loaded sketch from the MCU. To erase, press and hold the Erase button for a few seconds while the board is powered.

Additional Information:

• Item Code: OMP-A005
• Delivery Time: 2 to 3 days After Dispatch

Product Details:

Matching up with the ever increasing demands of the clients, our company is engaged in offering Arduino mega R3 2560,which contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. It is the recommended board for 3D printers and robotics projects. Offered assortment has 54 digital input/output pins (of which 15 can be used as PWM outputs), a USB connection, a power jack, an ICSP header, 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator and a reset button. Accessible in diversified specifications, this arduino mega R3 2560 (original) is a microcontroller board based on the ATmega2560.

Additional Information:

• Item Code: OMP-A003

Product Details:

The Arduino Pro Mini is a microcontroller board based on the ATmega328P. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI cable to provide USB power and communication to the board.The Arduino Pro Mini is intended for semi-permanent installation in objects or exhibitions. The board comes without pre-mounted headers, allowing the use of various types of connectors or direct soldering of wires. The pin layout is compatible with the Arduino Mini. 

There are two version of the Pro Mini. One runs at 3.3V and 8 MHz, the other at 5V and 16 MHz

Additional Information:

• Item Code: OMP-A018
• Port of Dispatch: Mumbai

Product Details:

Arduino Nano Board is an open-source physical computing platform based on a simple I/O board and a development environment that implements the Processing/Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, and MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux). It lacks only a DC power jack and works with a Mini-B USB cable instead of a standard one.

Additional Information:

• Item Code: OMP-A014

Product Details:

DETAILS:

ATmega328V

Operating Voltage 2.7-5.5 V

Input Voltage 2.7-5.5 V

Digital I/O Pins 14 (of which 6 provide PWM output)

Analog Input Pins 6

DC Current per I/O Pin 40 mA

Flash Memory 16 KB (of which 2 KB used by boot loader)

SRAM 1 KB

EEPROM 512 bytes

Clock Speed 8 MHz

Don't power the Lily Pad Arduino with more than 5.5 volts, or plug the power in backwards: you'll kill it.

Additional Information:

• Item Code: OMP-A016

Product Details:

Arduino Uno is a microcontroller board based on the CH340. It has 14 digital input, n microcontroller output pins (of which 6 can be used as PWM outputs) 6 analog inputs, 16MHz quartz crystal, USB connection, a power jack, microcontroller simplyICSP header and a reset button.It cont microcontroller simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.

Additional Information:

• Item Code: OMP-A012

Product Details:

Arduino Uno R3 Board is a microcontroller board based on the ATmega328P. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. You can tinker with your UNO without worrying too much about doing something wrong, worst case scenario you can replace the chip for a few dollars and start over again.

Additional Information:

• Item Code: OMP-A019

Product Details:

Arduino Uno R3 Board is a microcontroller board based on the ATmega328P. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. You can tinker with your UNO without worrying too much about doing something wrong, worst case scenario you can replace the chip for a few dollars and start over again.

Additional Information:

• Item Code: OMP-A001

Product Details:

The Micro is a microcontroller board based on the ATmega32U4, developed in conjunction with Adafruit. The Micro board is similar to the Arduino Leonardo in that the ATmega32U4 has built-in USB communication, eliminating the need for a secondary processor. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button. This allows the Micro to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port. It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard.

OTEHR DETAILS

ATmega32U4

Built in USB 2.0

Absolute maximum VCC: 6V

Maximum current for chip: 200mA

Maximum current per pin: 40mA

Recommended current per pin: 20mA

8-bit Atmel AVR

Flash Program Memory: 32kB

EEPROM: 1kB

Internal SRAM 2.5kB

ADC: 10-bit

PWM: 8bit

High Speed PWM with programmable

Resolution from 2-11 bits

LEDS

Power: Red

RX: Yellow

TX: Green

SERIAL

Use Serial for the USB connection

Use Serial1 for the hardware serial connection

POWER

RAW: 6V-16V

VCC: 5V at 500mA

USB

HID enabled

VID: 0x1B4F

PID: 0x9205 (boot loader); 0x9206 (sketch)

Additional Information:

• Item Code: OMP-A010

Product Details:

It is a customized version of the classic ARDUINO UNO R3 board. Full integration of microcontroller Atmel ATmega328 and IC Wi-Fi ESP8266 with 32 MB flash memory, and USB-TTL converter CH340G on one board And All modules can work together or independently.On the board where the switch of mode of operation with 8 position

Switch status and mode selection:

 

Additional Information:

• Item Code: OMP-A020

Product Details:

It is a customized version of the classic ARDUINO MEGA R3 board. Full integration of Atmel ATmega2560 microcontroller and  , and CH340G USB-TTL converter on a single board and Operating mode is selected by means of DIP switches on-board:

Switch status and mode selection:

Additional Information:

• Item Code: OMP-A021
• Delivery Time: 1 to 2 days after dispatch

Product Details:

• Arduino Yun Board is a microcontroller board based on the Atheros AR9331.
• Arduino is an open-source physical computing platform based on a simple input/output board and a development environment that implements the Processing/Wiring language.
• The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux).
• The Atheros processor supports a Linux distribution based on OpenWRT named Linino. The board has built-in Ethernet and Wi-Fi support, a USB-A port, microSD card slot, 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a 3 reset buttons.
• The Yún is similar to the Leonardo in that the ATmega32u4has built-in USB communication, eliminating the need for a secondary processor.
• This allows the Yún to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial COM port.

Additional Information:

• Item Code: OMP-A013
• Delivery Time: 1 to 2 days after dispatch

Product Details:

This is a multifunctional kit based on Arduino development board. It includes many of the most popular accessories for DIY projects: like Breadboard, Jumper wires, Color LEDs, Resistors, Buzzer, etc. When you get the kit, you can follow the tutorial to do experiments without buying any other additional components. The kit can help you learn Arduino programming and learn how to make interesting projects.

Additional Information:

• Item Code: OMP-A024
• Delivery Time: 1 to 2 Days

Product Details:

PRODUCT DETAILS

The LilyTiny is a tiny little LilyPad board designed to add flashy functionality to your project without taking up a lot of room. Even though it’s as small as some of the LilyPad sensors, this board actually has an ATtiny microcontroller on it. Simply sew on 4 LEDs and connect a battery and the LEDs will each blink or fade differently. One will blink on and off , another will flash a heartbeat pattern, another will do a “breathing” fade  and the other will do a random fade . LilyTiny is a quick and easy way to add twinkling lights to a project without any programming or a bulky Main Board. It’s also a great educational tool for showing a range of functionality without having to get out the computers.

OTHER DETAILS

Micro MCU: ATTINY85

Wearable Projects

512 Bytes In-System Programmable EEPROM

8K Byte of In-System Programmable Program Memory Flash

 

Additional Information:

• Item Code: OMP-A025
• Delivery Time: 1 to 2 Days

Product Details:

PRODUCT DETAILS

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available.

This is the LilyPad Arduino USB board, controlled by an ATmega32U4 with the Arduino bootloader. It has a built in power supply socket and an on/off switch with the only extra piece of hardware you need to program the LilyPad USB is a micro-USB cable, since the new IC has built-in USB support. Any of our LiPo batteries can be plugged right into the JST socket to provide you with easy, on-the-go power. That LiPo battery is even rechargeable through the board, no more special external LiPo chargers required!

OTHER DETAILS

Operating voltage: 3.3V

Input voltage: 3.8V to 5V

Digital I/O pins: 9

PWM channels: 4

Analog input channels: 4

DC current per I/O pin: 40mA

SRAM: 2.5KB (ATmega32u4)

EEPROM: 1KB (ATmega32u4), Flash memory: 32KB

Clock speed: 8MHz

Additional Information:

• Item Code: OMP-A026
• Delivery Time: 1 to 2 Days

Product Details:

PRODUCT DETAILS

WeMos D1 WiFi UNO ESP-12E Based ESP8266 Shield For Arduino Compatible. This is the old version of WeMos D1. 11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0).

The WeMos D1 is a ESP8266 WiFi based board that uses the Arduino layout with a operating voltage of 3.3V.

OTHER DETAILS

Analog Input Pins: 1 (3.2V max input)

On-Board Switching Power Supply

Input Voltage Range: 9V to 12V

Output: 5V at 1A Max

Board Dimensions: 68.6mm x 53.4mm (2.701" x 2.102") / Long x Wide

Weight: 21.8g

Additional Information:

• Item Code: OMP-A027
• Delivery Time: 1 to 2 Days

Product Details:

PRODUCT DETAILS

STM8S103F3P6 ARM STM8 Minimum System Development Board Module For Arduino.

The development board using Micro USB cable supply, compatible with smart phone lines, data lines is simple and easy to get, but not USB Mini line-powered.

Low price, user-friendly design, a full set of data, allowing you to save money, save time.

Use STM8S103F3P6 as the master IC.

OTHER DETAILS

On-board 100ma 3.3V Regulator

 Debug mode: SWD

 CPU Internal Maximum Clock : 72MHz

 External Clock Source: 8MHz crystal

 64K flash memory, 20K SRAM

On-board test indicator LED

On-board reset button and power indicator LED

All GPIO are led out and the names of the pins are marked

After soldering the headers, you can directly plug the board onto the breadboard

Additional Information:

• Item Code: OMP-A028
• Delivery Time: 1 to 2 Days