Omatom Power
Kalyan, Mumbai, Maharashtra
SEND SMS
SEND EMAIL
Product Details:
| Minimum Order Quantity | 1 Piece |
| Model Number | HM10 |
| Power Supply | +3.3VDC 50mA |
| Working Temperature | -5 +65 Centigrade |
| Frequency Range | 2.4GHz ISM band |
| Sensitivity | greater or equal to -84dBm at 0.1 percent BER |
| Synchronous | 6 kbps |
PRODUCT DETAILS
The Bluetooth-SoC can be accessed via UART interface and supports AT-Commands for setup. It supports full Bluetooth 4.0 standard and can be used for your Arduino or microcontroller to Android or iOS communication projects.
If you are in need of such a 4.0 BLE Bluetooth module, MCU can be set up,also can controlled by a remote Bluetooth device for setting,can transfer data, and can remotely control 10 PIO pins,so,the best choice is HM-10 bluetooth module.
Support Remote control mode, remote device can control PIO pin or modify settings by AT commander when Connected. (such as Iphone4s/5 ipad, Note2 etc.)
Support Central and Peripheral mode switch, modify by AT commander.
SPECIFICATIONS
USB Protocol: USB V2.0
Power Supply: +3.3VDC 50mA
Operating Frequency: 2.4GHz ISM band
Operating Temperature: -5 ~ +65 Centigrade
Modulation Mode: GFSK (Gaussian Frequency Shift Keying)
Transmitting Power: ≤4dBm
Sensitivity: ≤-84dBm at 0.1% BER
Transmission Rate: Asynchronous: 6 kbps
Synchronous: 6 kbps
Security Feature: Authentication and encryption
Support Service: Central & Peripheral UUID FFE0, FFE1
Physical Dimension: 27mm x 13mm x 2.2 mm.
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Model Number | HC 05 |
| Power Supply | +3.3VDC 50mA |
| Working Temperature | -20 +75Centigrade |
| Frequency Range | 2.4GHz ISM band |
| Sensitivity | greater than or equal to -84dBm at 0.1 percent BER |
| Synchronous | 1Mbps or 1Mbps |
PRODUCT DETAILS
SPECIFICATIONS
Power supply: +3.3VDC 50mA
Working temperature: -20 ~ +75Centigrade
Frequency: 2.4GHz ISM band
Modulation: GFSK(Gaussian Frequency Shift Keying)
Emission power: ≤4dBm, Class 2
Sensitivity: ≤-84dBm at 0.1% BER
Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps
Security: Authentication and encryption
Profiles: Bluetooth serial port
Dimension: 26.9mm x 13mm x 2.2 mm
APPLICATIONS
GPS receiver
Computer and peripheral devices
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Color | Multi |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Color | Multi |
DESCRIPTION
HC-06 Wireless Serial 4 Pin Bluetooth RF Transceiver Module RS232 TTL, It Allows your device to both send or receive the TTL data via Bluetooth technology without connecting a serial cable to your computer. Works with any USB Bluetooth adapters
FEATURES
Default Baud Rate: 9600, 8, 1, n.
Built in antenna
Operating voltage: 3.3V
Input voltage: 3.3~6V
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Power Supply | 3.3VDC 50mA |
| Working Temperature | 5 ~ 65 Centigrade |
HM Bluetooth module use CSR Blue Core or TI CC2540, Master and slave roles in one, transmission version and remote control version and PIO state acquisition functions in one, Support the AT command modify module parameters, Convenient and flexible. Transmission version can be used to transmit data between two Bluetooth devices.
Remote Control version can be used to Control PIO ports output high or low level without any other MCU. The PIO state acquisition version can be used to acquisition PIO ports state without any other MUC. (Only support Bluetooth V2.1) HM-01, HM-02, HM-03, HM-04, HM-05, HM-06, HM-07, HM-08, and HM-09 is Bluetooth V2.1 version. Use CSR Chip
FEATURES
Working frequency: 2.4GHz ISM band
Modulation method: GFSK (Gaussian Frequency Shift Keying)
RF Power: ≤4dBm, Class 2
Sensitivity: ≤-84dBm at 0.1% BER
Speed: Asynchronous: 2.1Mbps (Max) / 160 kbps Synchronous: 1Mbps/1Mbps(Max)
Service: Bluetooth SPP (Master & Slave)
Power: 3.3VDC 50mA
Working temperature:–5 ~ 65 Centigrade
Size: 26.9mm x 13mm x 2.2 mm.Flash:256Kb
HM-10 is Bluetooth V4.0 BLE version.
Use TI Chip.
HM Bluetooth module use CSR Blue Core or TI CC2540, Master and slave roles in one, transmission version and remote control version and PIO state acquisition functions in one, Support the AT command modify module parameters, Convenient and flexible.
Transmission version can be used to transmit data between two Bluetooth devices. Remote Control version can be used to Control PIO ports output high or low level without any other MCU.
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Power Supply | 3.3VDC 50mA |
| Working Temperature | 5 ~ 65 Centigrade |
HM Bluetooth module use CSR Blue Core or TI CC2540, Master and slave roles in one, transmission version and remote control version and PIO state acquisition functions in one, Support the AT command modify module parameters, Convenient and flexible. Transmission version can be used to transmit data between two Bluetooth devices.
Remote Control version can be used to Control PIO ports output high or low level without any other MCU. The PIO state acquisition version can be used to acquisition PIO ports state without any other MUC. (Only support Bluetooth V2.1) HM-01, HM-02, HM-03, HM-04, HM-05, HM-06, HM-07, HM-08, and HM-09 is Bluetooth V2.1 version. Use CSR Chip
FEATURES
Working frequency: 2.4GHz ISM band
Modulation method: GFSK (Gaussian Frequency Shift Keying)
RF Power: ≤4dBm, Class 2
Sensitivity: ≤-84dBm at 0.1% BER
Speed: Asynchronous: 2.1Mbps (Max) / 160 kbps Synchronous: 1Mbps/1Mbps(Max)
Service: Bluetooth SPP (Master & Slave)
Power: 3.3VDC 50mA
Working temperature:–5 ~ 65 Centigrade
Size: 26.9mm x 13mm x 2.2 mm.Flash:256Kb
HM-10 is Bluetooth V4.0 BLE version.
Use TI Chip.
HM Bluetooth module use CSR Blue Core or TI CC2540, Master and slave roles in one, transmission version and remote control version and PIO state acquisition functions in one, Support the AT command modify module parameters, Convenient and flexible.
Transmission version can be used to transmit data between two Bluetooth devices. Remote Control version can be used to Control PIO ports output high or low level without any other MCU.
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Model Number | HC06 |
PRODUCT DETAILS
It's very easy to add wireless serial connectivity for your device with this module. For Arduino and other boards are available. Once you pair with other Bluetooth device you work like with normal UART to exchange data.
SPECIFICATIONS
With build-in 2.4GHz antenna
It’s at the Bluetooth class 2 power level.
Operating voltage 3.1V~4.2V
Operating current in pairing is in the range of 30~40mA.
Operating current in communication is 8mA.
Standard HCI Port (UART or USB)
USB Protocol : Full Speed USB1.1, Compliant With 2.0
Storage temperature range: -40 °C - 85°C
Operating temperature range: -25 °C - +75°C
Dimensions 27mm×13mm×2mm
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Color | Black |
| Power Supply | 1.8 V - 3.6 V |
| Working Temperature | -40deg to 85deg |
| Frequency Range | 2.4 GHz |
PRODUCT DETAILS
NRF51822 Bluetooth Module for Wireless Communications. Bluetooth Low Energy 4.0 (BLE).
The nRF51822 is built around a 32-bit ARM® Cortex™ M0 CPU with 256kB/128kB flash + 32kB/16kB RAM for improved application performance.
The embedded 2.4GHz transceiver supports both Bluetooth LE and the Nordic Gazell 2.4 GHz protocol stack which is on air compatible with the nRF24L series products from Nordic Semiconductor.
FEATURES
Operating voltage: 1.8 V ~ 3.6 V
2.4 GHz multiprotocol RF transceiver
128 bit AES HW encryption
256kB flash & 16kB RAM
Programmable Peripheral Interconnect (PPI)
Digital interfaces: SPI, I2C, UART
10 bit ADC
Bluetooth Low Energy 4.0 (BLE)
APPLICATIONS
RFID labels
Smart home appliances
Bluetooth intelligent application
Mobile phone accessories
Industry control
Data acquisition system
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Model Number | HC08 |
PRODUCT DETAILS
HC-08 Bluetooth Serial Port Module 4.0 Low Power Consumption Current wireless Mobile phone serial communication module
SPECIFICATIONS
It is a bluetooth 4.0 ble module with 6 PIN baseboard for Arduino also for your DIY wireless project. leads interface includes VCC, GND, txd, rxd , status, EN
Only Slave mode. Compatible with iPhone 4s/5/5s 6/6s and android phones 4.3 or later.
Default rate : 9600, Working voltage 3.3V to 6V. and You can modify the baud rate and the Bluetooth name via the at command.
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Model Number | nRF52832 |
| Power Supply | 1.7V to 3.6V |
PRODUCT DETAILS
The nRF52832 is Nordic Semiconductor’s latest multiprotocol radio System on Chip (SoC). It’s half microcontroller, with a list of features including 32 configurable I/O pins, SPI, I2C, UART, PWM, ADC’s, 512kB flash, and 64kB RAM. And it’s half 2.4GHz multiprotocol radio, supporting Bluetooth Low Energy (BLE), ANT, and Nordic’s proprietary 2.4GHz ultra low-power wireless communication – it even features on-chip NFC tag support.
The nRF52832 Breakout provides easy access to all of the chip’s features. It breaks out all of the nRF52’s I/O pins, provides a 32.768 kHz RTC crystal, a user-programmable button and LED, and a trace antenna to send and receive those 2.4GHz transmissions.
The nRF52832 can operate on a power supply between 1.7 and 3.6V. The board also includes a 3.3V regulator with a maximum input of 6V, if you want to power the board with batteries or a regulated wall supply.
FEATURES
32-bit ARM Cortex-M4F Processor
Easy access to all 32 GPIO
SPI, I2C, UART, PWM and ADC I/O support
Pre-programmed serial bootloader
User-programmable LED and button
Arduino board definition available
Additional Information: