Product Details:
Minimum Order Quantity | 1 Piece |
Usage/Application | Industrial |
Working voltage | 3V to 9V |
Feature | Ability to operate with minimum or no lubrication, due to inherent lubricity. |
Power Source | Electric |
Packaging Type | Box |
PRODUCT DETAILS
Generally used in DIY projects, Battery operated toys, Radio controlled vehicles, Robotic projects etc.
OTHER DETAILS
RPM: 60
Operating Voltage : 3V - 9V
Gear materials: plastic.
Torque: Approximate 2.5Kg/cm.
Motor types: permanent-magnet.
Brush-type: Brush.
Magnet types: ferrite magnets.
FEATURES
Ability to operate with minimum or no lubrication, due to inherent lubricity.
Capability to absorb shock and vibration as a result of elastic compliance.
Corrosion-resistance; elimination of plating, or protective coatings.
Quietness of operation.
Low density: lightweight, low inertia.
Tolerances often less critical than for metal gears, due in part to their greater resilience.
Product Details:
Minimum Order Quantity | 1 Piece |
Voltage | 3V - 9V |
Usage/Application | DIY projects,Battery operated toys,Radio controlled vehicles |
Features | Quietness of operation,Capability to absorb shock and vibration as a result of elastic compliance |
Brush-type | Brush |
RPM | 150 |
Magnet types | Ferrite magnets |
Gear materials | Plastic |
Motor types | Permanent-magnet |
PRODUCT DETAILS
Generally used in DIY projects, Battery operated toys, Radio controlled vehicles, Robotic projects etc.
OTHER DETAILS
RPM: 150
Operating Voltage : 3V - 9V
Gear materials: plastic.
Torque: Approximate 2.5Kg/cm.
Motor types: permanent-magnet.
Brush-type: Brush.
Magnet types: ferrite magnets.
FEATURES
Ability to operate with minimum or no lubrication, due to inherent lubricity.
Capability to absorb shock and vibration as a result of elastic compliance.
Corrosion-resistance; elimination of plating, or protective coatings.
Quietness of operation.
Low density: lightweight, low inertia.
Tolerances often less critical than for metal gears, due in part to their greater resilience.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Application | Drone |
Power | 400 W |
Current | NA |
Brand | NA |
Diameter | 3mm |
No of Poles | na |
Model |
D2826 2200KV |
Compatible LiPO Batteries |
2S ~ 3S |
Motor KV (RPM/V) |
2200 |
Shaft Diameter (mm) |
3 |
Shaft Length (mm) |
10 |
Maximum Power (W) |
342 |
Compatible Propellers Size (inch) |
73/ 74 |
Required ESC (A) |
40 |
Width (mm) |
28 |
Height (mm) |
34 |
Weight (gm) |
42 |
Product Details:
Minimum Order Quantity | 1 Piece |
Model | GY-61 |
Usage/Application | Measure the static acceleration of gravity in tilt-sensing applications |
Power Supply | 3-5V DC |
Power Source | Electric |
Packaging Type | Box |
PRODUCT DETAILS
GY-61 DXL335 3-Axis Accelerometer Module is a three axis accelerometer sensor module based on ADXL335 integrated circuit. The ADXL335 is a triple axis accelerometer with extremely low noise and power consumption. The sensor has a full sensing range of +/-3g. It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration.
There is an on-board 3.3V voltage regulator to power the ADXL335 so power provided should be between 3.3V and 6V DC.
DETAILS
Model: GY-61
Using the chip: ADXL335
Power supply: 3-5V DC
Analog X, Y, Z three-axis output Direct output angle code
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Part Number | GY-291 |
Number of Axes | 3 |
Acceleration Range | 2-16 g |
Supply Voltage | DC |
Color | Blue |
Output Type | I2C |
Usage/Application | Sensor |
Size | 16mm to 20.5mm |
Number Of Pins | 8 |
Power | DC |
Product Category | Acceleration Sensor |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Part Number | GY 521 MPU 6050 |
Number of Axes | 3 |
Acceleration Range | 2-16 g |
Supply Voltage | DC |
Color | Blue |
Output Type | I2C |
Usage/Application | Sensor |
Dimension Mm | 21.2mm x16.4mm x 3.3mm |
PRODUCT DETAILS
This module features the MPU-6050 3-axis gyroscope and accelerometer. Also included on the board are pull-up resistors on the SDA and SCL lines as well as a 3.3V voltage regulator.
OTHER DETAILS
Three-axis gyroscope and three-axis accelerometer
Power Supply: 4.3 to 9 V
Communication Modes: standard IIC (I2C) communications protocol
Chip built-in 16bit ADC converter, 16-bit data output
Gyroscope Range: +/-250, +/-500, +/-1000, +/-2000 °/s
Acceleration Range: +/-2g, +/-4g, +/-8g, +/-16g
Dimensions (excluding pins): 21.2mm (0.84") length x 16.4mm (0.65") width x 3.3mm (0.13") height
Weight: 2.1g (0.07oz)
Additional Information:
Product Details:
Brand | TOWER PRO |
Model No. | MG 995 |
Connector Wire Length | 12" |
Gear Type | All Metal Gears |
Bearing Type | Double Ball Bearing |
Weight | 56gm |
Dimensions | 1.6" x 0.8"x 1.4" (41 x 20 x 36mm) |
PRODUCT DETAILS
High Torque Standard Modified Servo Motor with Metal Gears and 360° rotation.
Provides 11kg/cm at 4.8V, 13.5kgcm at 6V and 16kg/cm at 7.2V.
Compatible with RKI-2323, RKI-2322, RKI-2321, RKI-2320, RKI-2319, RKI-2318, RKI-2317,RKI-2316.
OTHER DETAILS
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-7.2 Volts
Operating Speed (4.8V): 0.18sec/60 degrees at no load
Operating Speed (6V): 0.16sec/60 degrees at no load
Operating Speed (7.2V): 0.14sec/60 degrees at no load
Stall Torque (4.8V): 11kg/cm
Stall Torque (6V): 13.5kg/cm
Stall Torque (7.2V): 16kg/cm
Max 60 RPM
360 Modified for continuous rotation
Operating Temperature Range: -10 to +60 Degree C
Bearing Type: Double Ball Bearing
Gear Type: All Metal Gears
Connector Wire Length: 12"
Dimensions: 1.6" x 0.8"x 1.4" (41 x 20 x 36mm)
Weight: 56gm
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Usage/Application | Industrial |
Power | Rotational Range: |
Speed | 0.10 sec/60 deg |
Torque | 1.8 kg-cm (4.8v) |
Motor Voltage | 5V |
Gear Type | Plastic |
Weight | 9g |
Tower Pro SG 90 Micro Servo Motor is manufactured and developed at our end by using best grade raw material and progressive technology in line with industry set norms and principles. Along with this, our offered motors are obtainable at very reasonable prices.
OTHER DETAILS
Torque: 1.8 kg-cm (4.8v)
Speed: 0.10 sec/60 deg
Weight: 9g
Gear Type: plastic
Rotational Range: 180 deg
FEATURES
Affordable rates
Reliable
Light weight
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Speed | 150RPM |
Voltage | 12V |
Features | 6mm shaft diameter with internal hole |
Load Current | 300 mA(Max) |
Weight | 125gm |
DC motors with Gearbox | 150RPM 12V |
Diameter with internal hole | 6mm shaft |
Stall Torque | 1kgcm torque |
No-load current | 60 mA(Max) |
PRODUCT DETAILS
150RPM 12V DC motors with Gearbox
No-load current = 60 mA(Max)
Load current = 300 mA(Max)
Stall Torque = 1kgcm torque
6mm shaft diameter with internal hole
125gm weight
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Phase Of Motor | Single Phase |
Motor Voltage | 3 Vots - 9 Volts |
Speed of Motor | 300RPM |
Power | Electric |
Application | DIY projects,Battery operated toys,Radio controlled vehicles |
Gear materials | Plastic |
PRODUCT DETAILS
These motors are light weight plastic body and plastic geared. Just give it 3 volt to 9 volt supply and off it goes. These motors work quite well at low voltages and are low weight as compared to DC geared Motors.
This Straight BO Motor is perfect for low cost DIY projects, Battery operated toys, RC Toys and other robotics and hobby project.
OTHER DETAILS
Operating Voltage : 3 Vots - 9 Volts
Torque: Approximate 0.8 Kg/cm.
FEATURES
Gear materials: Plastic.
Motor types: permanent-magnet.
Additional Information:
Product Details:
Usage/Application | Industrial |
Detection Motion Speed | 12000RPM |
Shape | Circular |
Packaging Type | Box |
Power Source | Electric |
PRODUCT DETAILS
Coin vibration motor, also known as shaftless or pancake vibrator motor. These miniature-vibrating motors are used in a wide range of products, like tools, scanners, medical instruments, GPS, and control sticks. Vibrator motors are also the main actuators for haptic feedback, which is an inexpensive way to increase a product''s value, and differentiate it from competition. Can be affixed in place with a very strong permanent self-adhesive mounting system.
DETAILS
Rated Voltage: DC 3V
Speed: 12000 RPM
Body Size: 10 x 2mm/ 0.39
Additional Information: