ESP8266 WiFi Modules

Product Details:

This is ESP-12E: ESP8266 Serial Port WIFI Wireless Transceiver Module For Arduino.

This small WIFI transceiver is the perfect solution for home Automation and IoT applications. It can be the replacement of your NRF24L01, it can talk to your WIFI router directly through the UART MCU’s (Rx, Tx).

The ESP-12 module is one of the most complete of the ESP family as it allows you to use the biggest amount of pins of all of them. You can program this module to work stand alone with the Arduino IDE or with LUA as NodeMCU.

The system is equipped with ESP8266 manifested leading features are: energy saving VoIP quickly switch between the sleep/wake patterns, with low-power operation adaptive radio bias, front-end signal processing functions.

The ESP8266-03 is one of the smallest versions of this module. It includes a built-in ceramic antenna.

Features :

1. WS2812 Led on board.
2. 802.11 b/g/n
3. Wi-Fi Direct (P2P), soft-AP
4. Integrated TCP/IP protocol stack
5. Integrated TR switch, balun, LNA, power amplifier and matching network
6. Integrated PLL, regulators, DCXO and power management units
7. +19.5dBm output power in 802.11b mode
8. Power down leakage current of <10uA
9. Integrated low power 32-bit CPU could be used as an application processor
10. SDIO 1.1 / 2.0, SPI, UART
11. STBC, 1×1 MIMO, 2×1 MIMO
12. A-MPDU & A-MSDU aggregation & 0.4ms guard interval
13. Wake up and transmit packets in < 2ms
14. Standby power consumption of < 1.0mW (DTIM3)
15. Access Point and Station Modes.

Additional Information:

• Item Code: OMP-W0000
• Delivery Time: 1 to 2 days

Product Details:

 

 

The Development Kit -based on ESP8266 CH-340, Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled.
Advanced API for hardware IO, which can dramatically reduce the redundant work for configuring and manipulating hardware.
Event-driven API for network applications, which facilitates developers writing code running on a 5mm*5mm sized MCU in Nodejs style.
We provide the best platform for IOT application development at the lowest cost.
Package Included: 2PCS x NodeMcu Lua V3 CH340G ESP8266 Wireless WIFI Internet Development Board Module

PRODUCT DESCRIPTION

Use CH340G replace the CP2102.
Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled

FOR Arduino like hardware IO
Advanced API for hardware IO, which can dramatically reduce the redundant work for configuring and manipulating hardware.
Code like FOR arduino, but interactively in Lua script.

Nodejs style network API
Event-driven API for network applications, which facilitates developers writing code running on a 5mm*5mm sized MCU in Nodejs style.
Greatly speed up your IOT application developing process.

 

 

Additional Information:

• Item Code: OMP-W029
• Delivery Time: 1 to 2 days

Product Details:

Product Introduction

ESP32-WROOM-32 is a powerful, generic Wi-Fi+BT+BLE MCU module that targets a wide variety of applications,ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3

 Specifications

Additional Information:

• Item Code: OMP-W031
• Delivery Time: 1 to 2 days

Product Details:

Breakthrough design, there are new breakthroughs, based on ESP-12E.
The new four-layer board design, the new revision antenna RF performance optimization, communication distance is increased by 30% -50% compared to ESP-12E!
Semi-hole chip technology, the whole IO leads, with metal shielding shell.
Built-board PCB antenna, 4M bytes Flash.
Pins and footprint are fully Compatible with ESP-12E and relevant breakout board.

PRODUCT DESCRIPTION 

Description: 

Breakthrough design, there are new breakthroughs, based on ESP-12E.

The new four-layer board design, the new revision antenna RF performance optimization, communication distance is increased by 30% -50% compared to ESP-12E!

Semi-hole chip technology, the whole IO leads, with metal shielding shell.

Built-board PCB antenna

4M bytes Flash.

Pins and footprint are fully Compatible with ESP-12E and our relevant breakout board.

Most of the documentation can refer to ESP8266 page.

 

Features: 

Type: ESP-12F

Standards Certification: FCC / CE / TELEC

Wireless standards: 802.11 b / g / n

Frequency range: 2.4GHz-2.5GHz (2400M-2483.5M)

Data interface: UART / HSPI / I2C / I2S / IR Remote Control GPIO / PWM

Operating voltage: 3.0 ~ 3.6V (recommendation 3.3V)

Working Current: Average: 80mA

Operating temperature: -40 ° C~ 125° C

Additional Information:

• Item Code: OMP-W030
• Delivery Time: 1 to 2 days

Product Details:

 

This is WiFi serial transceiver module, based on ESP8266 SoC.The SOC has Integrated TCP/IP protocol stack.It is TTL serial communication interface and its parameters can be set by AT command.

It is widely used in networking, smart home project when it is connected to the wifi router.

It can be used for remote monitoring of home appliances, bedroom temperature and humidity, and controlling home appliances by the mobile phone.

Features:

1. Communication interface voltage: 3.3V

2. IO Port Package: SMD, all IO ports are led out.

3. Antenna Type: Built-in ceramic antenna is available, and you can also use an external antenna.

4. Wireless Network Mode: station / softAP / SoftAP + station

5. Wireless criteria: 802.11 b / g / n

6. WIFI @ 2.4 GHz, support for WPA / WPA2 security mode

7. It is very easy to develop projects with AT command

 

Additional Information:

• Item Code: OMP-W045
• Delivery Time: 1 to 2 Days

Product Details:

 

Model: ESP8266 ESP-12E
Operating voltage: 3.0 ~ 3.6V (recommendation 3.3V)
Standard: 802.11b/g/n
Supports 3 modes: AP, STA, AP+STA
Dimension: 2.4 x 1.6cm

PRODUCT DESCRIPTION

"Specifications:
Model: ESP8266 ESP-12E
Operating voltage: 3.0 ~ 3.6V (recommendation 3.3V)
Standard: 802.11b/g/n
Built-in TCP/IP
Frequency range: 2,4 GHz - 2,5 GHz (2400 MHz - 2483,5 MHz)
PA: +25dBm
Supports 3 modes: AP, STA, AP+STA
Pad spacing: 2mm
Operating temperature: -40°C ~ +125°C
Dimension: 2.4 x 1.6cm

Package Includes:
1 x ESP8266 ESP-12E WIFI Module

 

Additional Information:

• Item Code: OMP-W046
• Delivery Time: 1 to 2 Days

Product Details:

PRODUCT DETAILS

Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled

for Arduino-like hardware IO

Advanced API for hardware IO, which can dramatically reduce the redundant work for configuring and manipulating hardware.

Code like for arduino, but interactively in Lua script.

Event-driven API for network applicaitons,

which faciliates developers writing code running on a 5mm*5mm sized MCU in Nodejs style.

Greatly speed up your IOT application developing process.

Lowest cost WI-FI

Less than $3 WI-FI MCU ESP8266 integrated and easy to prototyping development kit.

We provide the best platform for IOT application development at the lowest cost.

Additional Information:

• Item Code: OMP-W048
• Delivery Time: 1 to 2 Days

Product Details:

PRODUCT DETAILS

Operating voltage 3.0 V ~ 3.6 V

Operating current Average: 80 mA

Operating temperature range -40°C ~ 85°C

Storage temperature -40°C ~ 85°C

size 18 mm x 20 mm x 3 mm

FEATURES

External interface :Wi-Fi mode Station/SoftAP/SoftAP + Station

Peripheral interface :UART/HSPI/I2C/I2S/IR Remote Control,GPIO/PWM

Additional Information:

• Item Code: OMP-W062
• Delivery Time: 1 to 2 Days

Product Details:

ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.
Specifications:Serial/UART baud rate: 115200 bpsInput power: 3.3VI/O voltage tolerance: 3.6V MaxFlash Memory Size: 1MB (8Mbit)WiFi security modes: WPA, WPA2

Product Details:

Overview:

• Based on ESP8266 WiFi IC,
• This has an improved PCB layout and offers better radio performance over the ESP-12F.

Description:

• Fully compatible with forepast versions ESP-12E, or ESP12F
• the same physical dimensions and pinout as ESP-12E, or ESP12F
• Further improved antenna design, better signal performance
• Model: ESP8266-12S
• ISM 2.4GHz
• PA +25dBm
• 802.11b/g/n

Additional Information:

• Delivery Time: 1 to 2 days

Product Details:

Key Features:

448 KByte ROM
520 KByte SRAM
16 KByte SRAM in RTC.
 QSPI can connect up to 4* Flash/SRAM, each flash should be less than 16 Mbytes.
Supply Voltage: 2.2V~3.6V

WIFI
802.11 b/g/n/e/i
802.11 n (2.4 GHz), up to 150 Mbps
802.11 e: QoS for wireless multimedia technology.
WMM-PS, UAPSD
MPDU and A-MSDU aggregation
Block ACK
Fragmentation and defragmentation
Automatic Beacon monitoring/scanning
802.11 i security features: pre-authentication and TSN
Wi-Fi Protected Access (WPA)/WPA2/WPA2-Enterprise/Wi-Fi Protected Setup (WPS)
Infrastructure BSS Station mode/SoftAP mode
Wi-Fi Direct (P2P), P2P Discovery, P2P Group Owner mode and P2P Power Management
UMA compliant and certified
Antenna diversity and selection

Bluetooth:
Compliant with Bluetooth v4.2 BR/EDR and BLE specification
Class-1, class-2 and class-3 transmitter without external power amplifier
Enhanced power control
+10 dBm transmitting power
NZIF receiver with -98 dBm sensitivity
Adaptive Frequency Hopping (AFH)
Standard HCI based on SDIO/SPI/UART High speed UART HCI, up to 4 Mbps
BT 4.2 controller and host stack
Service Discover Protocol (SDP)
Security Manage Protocol (SMP)
Bluetooth Low Energy (BLE)
ATT/GATT
HID
All GATT-based profile supported
SPP-Like GATT-based profile
BLE Beacon
A2DP/AVRCP/SPP, HSP/HFP, RFCOMM
CVSD and SBC for audio codec
Bluetooth Piconet and Scatternet

Security:
IEEE 802.11 standard security features all supported, including WFA, WPA/WPA2 and WAPI
Secure boot
Flash encryption
1024-bit OTP, up to 768-bit for customers
Cryptographic hardware acceleration: -AES-HASH(SHA-2) library-RSA-ECC-Random Number   Generator (RNG)

Development support:
SDK Firmware for fast on-line programming
Open source toolchains based on GCC

Application:
Generic low power IoT sensor hub
Generic low power IoT loggers
      Video streaming from camera
      Over The Top (OTT) devices
Music players - Internet music players - Audio streaming devices
Wi-Fi enabled toys - Loggers - Proximity sensing toys
Wi-Fi enabled speech recognition devices
Audio headsets
Smart power plugs
Home automation
Mesh network

Additional Information:

• Delivery Time: 1 to 2 days

Product Details:

Features of Ultra-Small ESP8285 ESP-01F WiFi ModuleRTOS SupportWiFi SoC 802.11b/g/n32-Bit 80MHz/160MHz Micro MCU – Ultra-Low-Power integrated Tensilica L106Built-in high-precision 10-bit / 1-channel ADCADC, I2C, PWM, UART, GPIO supportSMD18RF/BB/PA/MAC/LNA integrated WiFiUART Buadrate 4Mbpx (max.)Lwip Protocol Stack (Embedded)Supports ATA, AP, STA+AP Operation ModesSupports Multi-Sleep ModeDeep-Sleep Current: 20uAFOTA Remote Firmware Upgrade SupportedUART Local Firmware Upgrade SupportedSupports AT CommandsLinux and Windows environment secondary development supportedAirKiss (WeChat), Config App Smart Support via One-Key NetworkingExternal Spring Antenna includedFCC & CE CertifiedWeight of the module is 1 gramDimensions of the module are 11mm x 10mm x 2mm

Additional Information:

• Delivery Time: 1 to 2 days

Product Details:

This D1 mini module is a mini WIFI board based on the ESP-8266EXThis WLAN board contains 11 digital input / output pins, all pins have interrupt / pwm / I2C / 1-wire support except D0Built-in WiFi and 4MB of flash memory. It can be programmed with the IDE or LUA, and supports both serial and OTA programmingComes with 3 different types of header connectors to support various configurations: Female, Male, Female/Male (long female)

Product Details:

• ESP8266-01S is an enhanced version of ESP8266 -01, perfect peripheral circuit, enhanced impedance matching, speed is faster, a stronger signal.
• Built-in 2.4Ghz antenna, wireless standards, 802.11 b / g / n, maximum operating speeds up to 2Mbps.
• Working voltage: DC3.0-3.6V (recommended 3.3V).
• This wireless transceiver module is made of good material, it can be reused multiple times. The details of the complete, self-calibrated RF to ensure optimal performance.
• The device can application for scenarios (wearable electronics, wireless location sensing devices, home automation, sensor networks, etc.)

Product Details:

The Latest ESP-12F ESP8266 Wifi Module AP & Station Remote Serial Wireless IoT Board is an integrated chip designed for the needs of a new connected world. It can handle all the necessary overhead for communicating with your network, such as TCP/IP stack and communicating with your 802.11 networks.

It is completely addressable over SPI and UART protocols allowing you to connect your sensors or project directly to it through its GPIO’s. ESP8266 is a low-cost Wi-Fi chip with full TCP/IP stack and MCU (Micro Controller Unit) capability.

ESP8266 Serial Wifi Wireless Transceiver Module is a self-contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. ESP8266 Serial Wifi Wireless Transceiver Module is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor.

Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much WiFi-ability as a WiFi Shield offers (and that’s just out of the box)! The ESP8266 module is an extremely cost-effective board with a huge, and ever-growing, community.

ESP8266 Serial Wifi Wireless Transceiver Module has a powerful enough onboard processing and storage capability that allows it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, including the front-end module, is designed to occupy minimal PCB area. The ESP8266 supports APSD for VoIP applications and Bluetooth co-existence interfaces, it contains a self-calibrated RF allowing it to work under all operating conditions and requires no external RF parts.

 

Specifications & Features of ESP-12F ESP8266 Wifi Wireless Module:-

• Communication interface voltage: 3.3V
• Working current: 240mA(MAX)
• Serial port baud rate: 115200 (default), can be modified to other values by AT command
• Serial communication format: 8N1
• Wireless Network Mode: station / softAP / SoftAP + station
• Wireless criteria: 802.11 b / g / n
• Compatible with ESP-12（ESP-202）
• WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
• It is very easy to develop projects with AT commands
• Surface Mount Package with 2mm Pitch Pads
• Mulitple GPIO’s for all your sensor needs
• Wi-Fi Direct (P2P), soft-AP
• Integrated TCP/IP protocol stack
• Integrated TR switch, balun, LNA, power amplifier and matching network
• Integrated PLL, regulators, DCXO and power management units
• +19.5dBm output power
• Power down leakage current of <10uA
• Integrated low power 32-bit CPU could be used as an application processor
• SDIO 1.1/2.0, SPI, UART
• STBC, 1×1 MIMO, 2×1 MIMO
• A-MPDU & A-MSDU aggregation & 0.4ms guard interval
• Wake up and transmit packets in < 2ms
• Standby power consumption of < 1.0mW (DTIM3)
• Both SMD and Inline package are available, and the pin pitch is 2.0mm.

Additional Information:

• Delivery Time: 1 to 2 days

Product Details:

PRODUCT DETAILS

This Wi-Fi module, which is based on the ESP8266, is compatible with every open source platform, such as Raspberry, Arduino, Banana Pi and CubieBoard, and is equipped with a range of useful functions.

Details:

Processor: Tensilica LX106

Operating voltage: 3.0 - 3.6 V (can be operated via 5-V microUSB)

Working current: 80 Ma

Operating temperature: -40 to 125°C

Clock speed: 80 - 160 MHz

Internal memory: 64 KB

Data memory: 96 KB

Wireless standard: 802.11 b/g/n

Frequency: 2.4 GHz

Data interfaces: UART/I2C/PWM/GPIO

Dimensions: 49,3 x 26,3 x 13 mm

Additional Information:

• Item Code: OMP-W047
• Delivery Time: 1 to 2 Days