Car Programmer

Product Details:

Working with on OBDII connector
Working with on the table through adapters
Work with multimedia unlocking the tape recorder
Work with keys (IMMO, Transponders), copying, preparation, unlocking
Work with IMMO-Key Auto dumps
Working with the airbag computer, deleting crash data
Transfer readings from miles to km
Read and write processors and its used in cars
Removing the particulate filter in the dump
Working with keys to the intercom
Realign Pin cod from dump (some brands)

Control board number, + scripts full Base number. Ability to update!
All adapters are tested for performance!

IProg is very powerful

Airbag,carradio,dpf off, ECU,IMMO KEY, MIL TO KM, PINABS,PINCODE SMATRA3,PINCODE SENSOR SPEED LIMIT,ODO Adjust,EEPROM,MCU-Atmel,Fujutsu,Microchip,Motorola,Motorola912EN,NECV850,BLR,CAN,CRC_Cript,ibutton,sd_unlocker,test.


IProg Pro Programmer Function List:

Working with on OBDII connector
Working with on the table through adapters
Work with multimedia unlocking the tape recorder
Work with keys (IMMO, Transponders), copying, preparation, unlocking
Work with IMMO-Key Auto dumps
Working with the airbag computer, deleting crash data
Transfer readings from miles to km
Read and write processors and its used in cars
Removing the particulate filter in the dump
Working with keys to the intercom
Realign Pin cod from dump (some brands)
Control board number, + scripts full Base number. Ability to update!
All adapters are tested for performance!


IProg Pro Programmer Support OS:
The program is designed to work in the operating systems of the Windows family . The following versions are supported:
Windows xp
Windows vista
Windows 7
Windows 8

Product Details:

Product Introduction: --Cover all major brands and protocols including Line, CAN, EDC17 and MED17.No tokens limitation, no need to disconnect the network when using.-- Main Function: --Possess several built in features and safeguards.Check of the battery voltage in real time.Full Recovery function in case of problems.-- Unique Design: --Automatic correction of the Checksum (where available).Boot-Loader mode supported.Management of the programming counters.the fuse box without cutting the wire.-- Excellent performance: --ScanTool function to remove DTC.Several options of reading/writing speed.Option to write full file/section of the map.

Product Details:

Orange5 Technical Info: * USB power supply (USB2.0/3.0) * Universal easy to plug panel ZIF16 for EEPROM * Control of contacts in the sockets * Two expansions compatible with Orange4 and Omega MTRK * Protection against overcurrent * Overload voltage protection
* Two types of power supply: Standart (USB) and enhanced (USB + external power supply) * Three 3 adjustable voltage and current control: Voltage of power supply ( 2.0...5.0V ), programming voltage (2.0...21.0V), additional static 10V for microcontrollers *High-speed bidirectional pin drivers with adjustable voltage (2.0...5.0V) * Wave cycle generator with frequency ( up to 24 Mhz) and out voltage(2.0...5.0V) adjustment * Capability of functional emulation of class CDC USB devices * Built-in 32-bit virtual machine * Supported interface: I2C, SPI, MicroWire, JTAG, UART, BDM, ISO7816, K-LINE (via adapter), CAN (via adapter) * Programmer is encolsed in a functional box. Supported working under Windows XP/7 32bit. [*Win8.1] - Installation and Work with Orange-5 under Windwos 7 and Windows 8.1
Feature: Supports any COM ports, incuding virtual ones from 1 to 20 Works with text (ASCII) and HEX mode Creating a list of commands that allows editing and fast sending Fine-tuning the exchange rate Saving files including command and port settings.
Saving incoming data in binary files File transfer via serial port. Delay settings for bytes and blocks "Echo" mode Delay settings between incoming data Managment of DTR, RTS chains, visualising DSR, CTS, CD, RI Program doesn't need to be installed Supports Orange5 programmer in emulation mode. Orange-5 Chip list v1.34 [November 2015]
Packiage List: Orange-5 programmer 1 Power adapter 1 USBcable 1 Incircuit wire 10 SOIC8/DIP8 Expert adapter 1 SOIC8/DIP8 adapter 1
SOIC8_14_93Cxx adapter 1 SSOP8/DIP8 1 Lead with clips SOIC8 & DIP8 1 Adapter 05L28/05B 1 Adapter 908AS60/AZ60 QFP64 1 Adapter 68HC(7)05P3/E6 1 Adapter 05B/X_705B/X QFP64 V2 1 Adapter 11PA8/11E9 QFP64 1 Adapter 68HC05H12 1 Adapter 68HC11EA9 1 Adapter 908AS60 1 Adapter 9S12Dxx 1 Adapter 912Dxx 1 Adapter 9S12X 1Adapter 912B32 QFP80 1 Adapter 68HC11F1 1 Adapter 68HC11L6 1 Adapter 68HC11KA4 1 Lead 11E9(20) with power 1 Lead for EWS3 mask 0D46J 1 Adapter TMS374C003A 1 Adapter MSP430F 1 Adapter 68HC11KA4 PLCC68 1 Adapter 908JL 1 Adapter PCF7941 1 Adapter 9S12XE 1

Product Details:

Iprog+ Programmer V85 Support Full Version with Probes Adapters
Top 3 Reasons to Get Iprog+ Programmer:
1. Functions including airbag, dashboard, car radio, ecu, eeprom, immo, mcu.
and more special functions like dpf off, MIL to KM, PINABS, PINCODE SMATRA3,PINCODE SENSOR SPEED LIMIT,ODO Adjust, Fujutsu, Microchip, Motorola, Motorola912EN, NECV850, BLR, CAN,CRC_Cript, ibutton, sd_unlocker,test etc.
2. Reasonable price: much more cheaper than original iprog+, but work as well as the original
3. IProg+ is designed to work in the operating systems of the Windows family:
Windows xp
Windows vista
Windows 7
Windows 8
IProg+ Programmer Detailed Function List:
Working with odometers on OBDII connector
Working with odometers on the table through adapters
Work with multimedia unlocking the tape recorder
Work with keys (IMMO, Transponders), copying, preparation, unlocking
Work with IMMO-Key Auto dumps
Working with the airbag computer, deleting crash data
Transfer readings from miles to km
Read and write processors and its used in cars
Removing the particulate filter in the dump
Working with keys to the intercom
Realign Pin cod from dump (some brands)
Control board number, + scripts full Base number. Ability to update!
Iprog+ Programmer Software Display:

Product Details:

Iprog+ Programmer V85 Support IMMO +Mileage +Airbag till 2019
Top 3 Reasons to Get Iprog+ Programmer:
1. Functions including airbag, dashboard, car radio, ecu, eeprom, immo, mcu.
and more special functions like dpf off, MIL to KM, PINABS, PINCODE SMATRA3,PINCODE SENSOR SPEED LIMIT,ODO Adjust, Fujutsu, Microchip, Motorola, Motorola912EN, NECV850, BLR, CAN,CRC_Cript, ibutton, sd_unlocker,test etc.
2. Reasonable price: much more cheaper than original iprog+, but work as well as the original
3. IProg+ is designed to work in the operating systems of the Windows family:
Windows xp
Windows vista
Windows 7
Windows 8
IProg+ Programmer Detailed Function List:
Working with odometers on OBDII connector
Working with odometers on the table through adapters
Work with multimedia unlocking the tape recorder
Work with keys (IMMO, Transponders), copying, preparation, unlocking
Work with IMMO-Key Auto dumps
Working with the airbag computer, deleting crash data
Transfer readings from miles to km
Read and write processors and its used in cars
Removing the particulate filter in the dump
Working with keys to the intercom
Realign Pin cod from dump (some brands)
Control board number, + scripts full Base number. Ability to update!
Iprog+ Programmer Software Display:

Product Details:

JC V1SE Programmer (WiFi version) is a solution for reading / writing / repairing data of Proximity Light Sensor, True Tone Display, Multi Touch, battery, Face ID dot matrix projector, fingerprint, and vibrator on iPhone 7 / 7P / 8 / 8P / X / XS / XR / XS Max / 11 / 11 Pro Max / 12 / 12 mini / 12 Pro / 12 Pro Max / 13 / 13 mini / 13 Pro / 13 Pro Max / 14 / 14 Plus / 14 Pro / 14 Pro Max.

Simply connect the phone and read the original data such as screen code / battery code / fingerprint serial number in one click. A handy tool for iPhone components replacement.

Note! This product is not covered by the warranty!

Additional Information:

• Delivery Time: 15 to 17 Days