Omatom Power
Goregoan, Mumbai, Maharashtra
SEND SMS
SEND EMAIL
Product Details:
| Minimum Order Quantity | 1 Piece |
| Model/Type | GY-87 |
| Type | Gyrosopic Sensor |
| Detecting Angle | 6D-orientation detection |
| Weight G | 10 gm |
| Power supply | 3-5V |
| Dimensions | 22 x 17 mm |
PRODUCT DETAILS
SPECIFICATIONS
Power supply : 3-5V
3-axis Gyro+Acceleration+Magnetic Field
Air Pressure Module
Build in ultra low noise linear LDO voltage regulator
Build-in on board filters, which reduce noise from motor and other high current electronics
You can easy select two I2C address for MPU6050 by soldered jumper
Power LED
Build in Logic level converter for I2C
Designed for 5V logic level
Weight :10 gm.
Dimensions : 22 x 17 mm
APPLICATIONS
Motion-activated functions
Intelligent power saving for handheld devices
Vibration monitoring and compensation
Free-fall detection
6D-orientation detection
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Model/Type | GY-521 |
| Type | Gyroscopic Sensor Module |
| Range | +/-250,+/-500,+/-1000,+/-2000 degree/s |
| Acceleration Range | +/-2g,+/-4g,+/-8g,+/-16g |
| Gyroscope Range | +/-250,+/-500,+/-1000,+/-2000 Degree/s |
| Dimensions (excluding pins) | 21.2mm (0.84") length x 16.4mm (0.65") width x 3.3mm (0.13") height |
PRODUCT DETAILS
This module features the MPU-6050 3-axis gyroscope and accelerometer. Also included on the board are pull-up resistors on the SDA and SCL lines as well as a 3.3V voltage regulator.
SPECIFICATIONS
Three-axis gyroscope and three-axis accelerometer
Power Supply: 4.3 to 9 V
Communication Modes: standard IIC (I2C) communications protocol
Chip built-in 16bit ADC converter, 16-bit data output
Gyroscope Range: +/-250, +/-500, +/-1000, +/-2000 °/s
Acceleration Range: +/-2g, +/-4g, +/-8g, +/-16g
Dimensions (excluding pins): 21.2mm (0.84") length x 16.4mm (0.65") width x 3.3mm (0.13") height
Weight: 2.1g (0.07oz)
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Usage | For accurate measurement of humidity and temperature,provides industrial accuracy of measurements |
| Voltage | 1.9-3.6V |
| Accuracy | 0.4 deg(-10 to 85 deg) and 3percent RH |
| Humidity accuracy | +- 3% RH (0-80% RH) |
| Temperature conversion time | 7ms |
| Humidity conversion time | 17ms |
| Humidity range | 0-100% RH (20% - 80% RH recommended) |
PRODUCT DETAILS
The module is designed for accurate measurement of humidity and temperature. The sensor is equipped with Si7021 chip with I2C interface, which provides industrial accuracy of measurements.
SPECIFICATIONS
Operating voltage: 1.9-3.6V (3.3V recommended)
Standby current: 60nA
Temperature range: -40 to 85 ° C (-10 to 60 ° C is recommended)
Temperature accuracy: ± 0.4 ° (-10 to 85 °)
Temperature conversion time: 7ms
Humidity conversion time: 17ms
Humidity range: 0-100% RH (20% – 80% RH recommended)
Humidity accuracy: ± 3% RH (0-80% RH)
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Model Number | CJMCU-105 |
| Usage/Application | used to store data to minimize host processor intervention |
| Brand | Omatom Power |
| Dimensions | 1.6" x 0.8"x 1.4" (41 x 20 x 36mm) |
| Connector Wire Length | 12" |
| Gear Type | All Metal Gears |
| Weight | about 0.9g |
| Size | 14mm X 19mm |
PRODUCT DETAILS
ADXL345 is well suited for mobile device applications. It can be measured in tilt-sensing applications, static acceleration of gravity; you can also measure the motion or shock caused by dynamic acceleration. Its high resolution, capable of measuring less than 1.0 ° tilt angle.
Tap sensing detects and double-clicks action. Freefall Detection function detects the device is falling. These functions can be mapped to two interrupt output pin in one. The patent-pending 32 FIFO (FIFO) buffer can be used to store data to minimize host processor intervention.
SPECIFICATIONS
Supply voltage: DC 3V-5V power supply
Communication: I2C/SPI 2 kinds of optional ways
Size: 14mm X 19mm
Weight: about 0.9g
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Model | GY-9250 |
| Power Supply | 3-5V |
| Size | 15mm * 25mm |
| Features | Communication method Standard IIC communication protocol Chip built-in 16bit AD converter |
PRODUCT DETAILS
SPECIFICATIONS
Power supply: 3-5V (internal low voltage regulator)
Gyroscope range: ± 250 500 1000 2000 ° / s
Acceleration range: ± 2 ± 4 ± 8 ± 16g
Magnetic field range: ± 4800uT
Pin spacing: 2.54mm
Module size: 15mm * 25mm
Communication method: Standard IIC communication protocol
Chip built-in 16bit AD converter, 16-bit data output
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Application | Built-in communication converter to connect directly to microcontroller IO interface. |
| Usage/Application | Direct digital output,complex calculation is omitted,omitting calibration. |
| Model Number | GY-30 |
| Supply Voltage | 3v-5v. |
PRODUCT DETAILS
SPECIFICATIONS
Power supply:3v-5v.
The sensor built 16bitAD converter.
Direct digital output, complex calculation is omitted, omitting calibration.
Close to the visual sensitivity of the spectral characteristics.
The standard IIC communication protocol.
Built-in communication converter to connect directly to microcontroller IO interface.
Does not distinguish between ambient light.
1 lux high-precision measurement of a wide range of brightness.
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Model | GY-61 |
| Usage/Application | measure the static acceleration of gravity in tilt-sensing applications |
| Power Supply | 3-5V DC |
PRODUCT DETAILS
GY-61 DXL335 3-Axis Accelerometer Module is a three axis accelerometer sensor module based on ADXL335 integrated circuit. The ADXL335 is a triple axis accelerometer with extremely low noise and power consumption. The sensor has a full sensing range of +/-3g. It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration.
There is an on-board 3.3V voltage regulator to power the ADXL335 so power provided should be between 3.3V and 6V DC.
SPECIFICATIONS
Model: GY-61
Using the chip: ADXL335
Power supply: 3-5V DC
Analog X, Y, Z three-axis output Direct output angle code
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Model/Type | GY-50 L3G4200D |
| Type | 3 Axis Gyroscopic Sensor |
| Range | User selectable |
PRODUCT DETAILS
GY-50 L3G4200D 3-Axis Gyroscope Sensor Module also features a 32 count first in first out (FIFO) buffer, allowing you to request the data in batches, rather than having to constantly query the device.
GY-50 L3G4200D 3-Axis Gyroscope Sensor Module is an angular velocity sensor board which contains a 3-axis gyroscope, providing you with very high resolution (16 bit) measurements at up to 2000 dps. The module outputs data over either I2C or SPI. The gyroscope measures how much the device is rotating around all three axis, the range is user selectable and so can be adjusted to suit your application.
SPECIFICATIONS
Operating Voltage: 3.5V – 5.5V
32 count FIFO buffer
I2C and SPI interface
3-axis gyroscope module
16 bit resolution
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Model | GY-291 |
| Power Supply | 4.0 V to 6 V |
PRODUCT DETAILS
On-board is an ADXL345 triple axes accelerometer with high resolution (13-bit) up to ±16 g. The digital output data is formatted as 16-bit twos complement and accessible through either a SPI or I2C.
SPECIFICATIONS
Module supply voltage range: 4.0 V to 6 V
I/O voltage range: 1.7 V to 3.6V
Ultralow power: as low as 23 µA in measurement mode and 0.1 µA in standby mode at VS = 2.5 V (typical)
Power consumption scales automatically with bandwidth
User-selectable resolution up to 13-bit at ±16 g (maintaining 4 mg/LSB scale factor in all g ranges)
Free-fall detection
SPI (3- and 4-wire) and I2
Wide temperature range (−40°C to +85°C)
Additional Information:
