Brand – CREALITY 3D
Model – CR-100.
Power Supply Input: AC 100-240V Output: DC 12V.
N.W. – 2.8Kg.
G.W. – 3.9Kg.
Printing Size – 100*100*80mm.
Machine Size – 241*183*255mm.
Package Size – 250*230*340mm.
File Format – STL,obj,amf
Color Available – Blue
Printing Method – FDM
Nozzle – 1pcs
Slice Thickness – 0.1mm-0.4mm.
Filament Diameter – 1.75mm
Working Mode – Online or SD card offline.
Nozzle Diameter – Standard 0.4mm
Plug – Default EU Plug from CN Warehouse
Rated Power – 50W
Slice Software Cura/Repetier-Host/Simplify 3D.
1 x CR-100 3D Printer (With 200g Filament)
The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 micro stepping bipolar stepper motor driver.
The DRV8825 features adjustable current limiting, over current and over temperature protection, and six micro step resolutions (down to 1/32-step). It operates from 8.2 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).
The module has a pin out and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications.
Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
Can interface directly with 3.3 V and 5 V systems
Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout
Short-to-ground and shorted-load protection
4-layer, 2 oz copper PCB for improved heat dissipation
Exposed solderable ground pad below the driver IC on the bottom of the PCB
Module size, pin out, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)
Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motors rated voltage to achieve higher step rates
Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
45 V maximum supply voltage
Built-in regulator (no external logic voltage supply needed)
|Minimum Order Quantity||1 Piece|
|Motor Driver||3 axis stepper motor driver|
CNC shield V4 needs to work with Nano board.
It can be used as driver expansion board for engraving machines and 3D printers. It has in total 3 channel slots for A4988 stepper motor driver modules for driving 3 channels of stepper motors.
Each channel of stepper motor only needs 2 IO ports, which means 6 IO ports, is sufficient to manage 3 stepper motors.
This shield can make quick work for managing stepper motors in your project.
Power DC 5V interface.
7.5-12V voltage input.
2A can be controlled within the two-phase four-wire stepper motor.
Compatible with micro-drive laser engraving machine, three-axis CNC engraving machine.
Released the I2C interface, you can connect to the LCD I2C or another I2C module.
3D Printer Parts 3D J-Head CR10 Hotend Extruder Kit For CR10 CR8 CR-10 CR-10S 3D V6 Bowden Extruder Aluminum 1.75/0.4MM Nozzle
Type: Extruder Set.
Nozzle: 1.75/0.4 mm.
Fit to: 1.75 filaments.
Installation Type: External Thread Connection.
Material: Aluminum & Stainless Steel & Brass.
Color: Red, Blue, Silver.
Bore 4.1 mm throat.
Thermistor: 100K NTC B 3950 1%, length 1 meter, With DuPont.
1PCS x 3D 12V Bowden Extruder.
Made of PU material and steel core, very flexible and strong Compared with 2GT black belt with glass fiber core, strong steel core wires are Excellent process , Small Tolerances Flexible ,Low Noise, High Wear Resistance Suitable for small precision machinery transmission, such as 3D printers, intelligent plotter, etc With reliable transmission and good dimensional stability.
Material: PU, steel
Width: 6mm / 0.23″, 10mm
Pitch: 2mm / 0.08″
Endstop Mechanical Limit Switches 3D Printer Switch for RAMPS 1.4
1) red line connecting VCC (ramps of +)
2) Connect the black wire GND (ramps of -)
3) Green Line connection SIGNAL (ramps in s)
1PCS x mechanical switch
1PCS x Cable 3-pin 70CM
0.3 mm Nozzle for 3d Printer