Omatom Power
Kalyan, Mumbai, Maharashtra
SEND SMS
SEND EMAIL
Product Details:
| Minimum Order Quantity | 1 Piece |
| Switch Function | ON/OFF |
| Model No. | Joy Stick |
| Material/Body | Metal |
| Brand | NA |
| Color | Black |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Size | MicroSD |
| Memory Size | 2GB |
| Usage/Application | MP3 Player |
| Features | Simple breakout board with extremely small form factor. |
PRODUCT DETAILS
A microSD card reader and writer with included 3.3V regulator and level shifters making safe to interface with most 5V and 3.3V microcontrollers, including the Arduino Uno, Leonardo, Mega, Due, etc.
The module (Micro SD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the Micro SD card read and write files.
Users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write.
SPECIFICATIONS
Supply voltage: 5V-15V
Build in logic lever converter
Interface: SPI
Mounting holes: 2, 2 mm
Size: 46 x 24 x 7 mm
FEATURES
Simple breakout board with extremely small form factor.
Automatic 5V to 3.3V power conversion and logic translation.
Easy interface to any micro-controller with SPI bus support and Fast SPI protocol operation.
APPLICATION
Data logging/Time Stamping
File storage and operations
Music or sound
High data volume operations
I/O Read/Write Streaming
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Brand | Multi |
DESCRIPTION:-
This Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the amplifier to your microcontroller you will be able to read the changes in the resistance of the load cell and with some calibration you'll be able to get very accurate weight measurements. This can be handy for creating your own industrial scale, process control, or simple presence detection. The HX711 uses a two wire interface (Clock and Data) for communication. Any microcontroller's GPIO pins should work and numerous libraries have been written making it easy to read data from the HX711. Check the hookup guide below for more information. Connection for Wheatstone bridge to connect to the HX711, These are commonly colored Red, Black, White, Green. Each color corresponds to the conventional color coding of load cells: Red (Excitation+ or VCC), Black (Excitation- or GND), White (Amplifier+, Signal+, or Output+), and Green (A-, S-, or O-)
FEATURES:
Operation Voltage: 2.7V-5V
Operation Current: < 1.5mA
Selectable 10SPS or 80SPS output data rate
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Input Type | DC |
| Voltage | 5V |
DESCRIPTION
L298N DC Motor Driver Module Robot Dual H Bridge for Arduino PIC AVR, H-Bridge's is typically used in controlling motors speed and direction.
SPECIFICATIONS
Driver: L298N Dual H Bridge DC Motor Driver IC
The terminal supply area of driven part Vs: +5 V ~ +35 V; such as the need to take power within the board, the supply area Vs: 7V ~ 35V
The peak current of driven part Io: 2A
The terminal supply of area the logical part Vss: +5 V ~ +7 V (can take power within the board +5 V)
The operating current range of the logical part: 0 ~ 36mA
Control signal input voltage range:
Enable signal input voltage range:
Maximum power consumption: 20W (when the temperature T = 75 °C)
Storage temperature: -25 °C ~ +130 °C
Other Extensions: control of direction indicators, the logic part of the plate to take power interface.
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Brand | Mastech |
DESCRIPTION-
3000 counts LCD display
Full automatic measurement
Auto scanning the Resistance/Capacitance/Diode
Function selection by one FUNC Push Button
Data Hold function
Continuity checking function
Over Load Indication ('OL')
Low Battery Indication
Power Supply 3V Lithium Battery CR2032 1PC (included)
Auto power-off. If the Tester is idle for more than 10 minutes, the tester will automatically turn off the power.
Operating temperature & Humidity 0 ~ 40C (32 ~104F) & < 80% RH
Storage temperature & Humidity -10 ~ 50C (14 ~ 122 F) & <70%RH
Safety Class IEC1010-1, CAT II
EMC According to CE regulation 89/336.
Specifications | |||
Function | Range | Resolution | Accuracy |
300 | +-(1.0% of rdg + 2 digits) | ||
3K | |||
Resistance | 30K | 0.1 | |
300K | |||
3M | |||
30M | +-(1.2% of rdg + 3 digits) | ||
3nF | +-(2.5% of rdg + 3 digits) | ||
30nF | |||
300nF | 1pF | ||
Capacitance | 3F | ||
30F | |||
300F | +-(3.0% of rdg + 3 digits) | ||
3mF | |||
30mF | |||
Diode | Open Circuit Voltage 2.8 V | ||
Check | Testing Current2mA | ||
Continuity Check | The buzzer will sound if the resistance is less than 30 | ||
Package includes
1x SMD tester
2 x Backup test pins
1 x Storage box
1 x User manual
Product Details:
| Minimum Order Quantity | 1 Piece |
| Model | DY02 |
| Usage | Industrial, Laboratory |
| Voltage | 6 V-9 V |
DESCRIPTION
Smart Robot Car Chassis Kit Speed Encoder Battery Box for Arduino, Smart car chassis tracing car Robot car chassis with code disk Ideal for DIY Mechanical structure. It is very simple to install this car is the tachometer encoder with a 4 AA battery box and power switch (batteries not provided). Motor power supply is 6V 9V. The car Chassis is transparent- you need to remove protective paper.
APPLICATION
Can be used for distance measurement, obstacle avoidance, distance testing, and speed testing, wireless remote control robot cars
PACKAGE INCLUDED:
1 x Car chassis
2 x Gear motor
2 x Car tire
2 x Speed encoder
2 x Fastener
1 x Universal wheel
1 x Screwdriver
1 x Battery box (batteries not provided)
All necessary screw and nut
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Usage | engineering student projects |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Color | Red and Blue |
| Pin | 8 |
DESCRIPTION
A Matrix Membrane Keypad Arduinois the most commonly used input device in many of the application areas like Arduino project, digital circuits, telephone communications etc. A matrix keypad consists of a set of push button or switches which are arranged in a matrix format of rows and columns.
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Input Type | DC |
| Voltage | 5v |
DESCRIPTION
High quality stepper motor with ULN2003 driver
Suitable for microcontroller development
Voltage: DC 5V
Diameter: 28mm
Step Angle: 5.625*1/64
Reduction Ratio: 1/64
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Color | Black |
PRODUCT DETAILS
The Laser Transmitting Module emits a small intense beam of wavelength 650nm.
It can be used in various applications like Laser Obstacle, Laser Guitar, Home-Made Laser Tag, etc.
The module is compatible with various contemporary Microcontrollers including Arduino, Raspberry Pi, etc. It is available with a fixed screw hole for easy deployment.
SPECIFICATIONS
Color: Black
Supply Voltage : 5V DC
Output Wavelength : 650 nm
Pins : 3 (GND, VCC, I/P)
Dimensions (LBH in mm): 20 x 5 x 13
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Diameter | 2.1mm |
| Color | Black |
PRODUCT DETAILS
This is a common barrel-type power jack for DC wall supplies.
These are compatible with our DC wall supplies and have a 5.5mm jack, with a 2.1mm center pole diameter.
FEATURES
Current Rating: 5A
Inside Contact Diameter: 2.1mm
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Input Voltage | 4.5V to 36V |
| Model Number | L293D |
| Motor Type | DC motor driver IC Board |
PRODUCT DETAILS
This module is a medium power motor driver perfect for driving DC Motors and Stepper Motors.It uses the popular L293D motor driver IC. It can drive 4 DC motors in one direction, or drive 2 DC motors in both the directions.
This motor driver is perfect for robotics and mechatronics projects for controlling motors from microcontrollers, switches, relays, etc.
Perfect for driving DC and Stepper motors for micromouse,line following robots,robot arms, etc.
FEATURES
L293D motor driver IC.
Screw terminal connectors for easy motor connection.
Male burgstick connectors for supply, ground and input connection.
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Color | White |
| Material | ABS Plastic |
PRODUCT DETAILS
Solderless Breadboard with 400 tie point. It has 2 power buses, 10 columns, and 30 rows. All pins are spaced by a standard 0.1inch. The two sets of five columns are separated by about 0.3 inch.
FEATURES
Color: White
Solderless breadboard with 400 tie points
Self-adhesive tape is included on the back
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Brand | Mifare |
| Type of Reader | RFID Reader |
| Item Code | OMP-M102 |
| Operating Temperature | -30 deg to 60 deg |
| Power Supply | 5V |
PRODUCT DETAILS
The USB RFID Reader allows solutions developers to support applications that require desktop reading and writing of 13.56 RFID tags (M1).
This is an RFID 13.56MHz IC Mifare card reader which is widely used for RFID radio frequency identification system and project, such as automated parking management, personal identification and production access control.
SPECIFICATIONS
Consume Current: 70mA
Frequency: 13.56MHz
Temperature: -30 ~ 60°C
Default output: 8H+10D (10 bits)
Baud Rate: 9600
Interface: USB
Power Source: USB
Card Reading Distance: 0-8cm
Humidity: 5%-95% RH(Non-condensing)
Size: 105mm x 70mm x 12mm
Item Weight: 75g
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Type of Reader | Card Reader |
| Item Code | OMP-M117 |
| Operating Temperature | -30 degrees to +60 degrees |
| Power Supply | Power directly from USB |
PRODUCT DETAILS
This RFID Card Reader is ideal for Raspberry Pi projects that has RFID purposes.
It is compact and has ready USB interface. It reads the ID number from the EM 4100 card or a compatible card and sends the data directly similar to your keyboard.
SPECIFICATIONS
Frequency: 125Khz.
Support Windows95/98/2000/XP/7/8.
Interface: USB, 106 bit/s
Reading distances up to 8 cm
Temperature: -30 degrees to +60 degrees
Element size L x W x H: 95 x 61 x 10mm
Weight: 33g
FEATURES
Support μEM4001, 4100, or its compatible RFID, ID card.
Read first 10 digits of the RFID/Proximity card.
Plug and Play
Reliable working condition
Powered directly from USB, no need external power supply
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| colour | blue |
PRODUCT DETAILS
This is XH-M602 3.7-120V Digital Control Lithium Battery Charging Control Module.
SPECIFICATIONS
Supply Voltage: 220V
Input Voltage: AC 220V
Type: Voltage Regulator
Voltage Tolerance: +/-0.1V
Output Type: output switch
Display Precision: 0.1V
Application Fields: For 3.7-120V lithium battery or storage battery
Size: 86*58*24mm
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Usage/Application | Perfect for DIY project |
| Brand | Omatom Power |
| Material | plastic and copper |
PRODUCT DETAILS
SPECIFICATIONS
Voltage: DC 3V
Working current: < 40mA
Input power: 150Mw
Working temperature: -36~65’C
Wavelength: 650nm
Output laser power: < 5mW
Cable length: 4.6cm
Dimensions: 2.36 in x 0.24 in x 0.24
Weight: 0.18 oz (5 g)
APPLICATIONS
Perfect for DIY project
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Color | black |
| Size | 30x25 mm. |
PRODUCT DETAILS
DPDT switch box in plastic for mounting 2 numbers of the rocker-type DPDT switches.The switch box is a combo of 2 switch compatible box used to control appliances or robots.
SPECIFICATIONS
Material: Black plastic molded.
Cutting: For 2 switches.
Fitting switch type: Momentary.
Switch cutting holes: 28x22 mm.
Switch size: 30x25 mm.
Width: 10 cm.
Height: 6 cm.
Depth: 4 cm.
APPLICATIONS
PIC based robotics projects.
ARM based robotics projects.
Arduino based robotics projects.
Raspberry-pi based robotics projects.
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Model | KA2284 |
| Color | Blue |
| Usage/Application | Perfect for Arduino DIY project |
PRODUCT DETAILS
The KA2284 battery level indicator contains five LED lights that progressively light up as the voltage increases.
The KA2284 battery level indicator is great for your projects that require voltage level indicators such as battery indicators and audio level indicators.
SPECIFICATIONS
Supply voltage: 3.5V-12V
PCB board size: 29 (mm) x21 (mm)
Weight : 16g
FEATURES
Adjustable span of power level
Perfect for Arduino DIY project
The magnitude of the level can be adjusted
AC and DC signals can be controlled by jumper
Additional Information:
DESCRIPTION:-
Standard interface that can be expanded in a variety of development board
Touch switch uses high-quality, beautiful and durable
Buttons have been marked, convenient and practical
Applicable to a variety of platforms including Arduino / AVR / ARM
Working voltage: - 5V
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Model Number | OV7670 |
| Application | High sensitivity suitable for illumination applications,Low voltage suitable for embedded |
PRODUCT DETAILS
The OV7670 image sensor is a small size, low operating voltage, yet it provides all the features of a single-chip VGA camera and image processor has to offer. Through the SCCB bus control, it can output the entire frame / sub-sampled.
VGA image of the product is up to 30 frames / sec. Users can have full control of the image quality, data format and transmission mode. The image processing functions includes gamma curves, white balance, saturation, chroma, and also can be programmed through the SCCB interface.
SPECIFICATIONS
IO Voltage: 2.5V to 3.0V (internal LDO for nuclear power 1.8V)
Power operation: 60mW/15fpsVGAYUV
50/60Hz automatic detectionA
Photosensitive array: 640X480
Sleep: <20μA
Temperature Operating: -30 ¿¿¿ to 70 ¿¿¿
Stable: 0 ¿¿¿ to 50 ¿¿¿
Output Formats (8): YUV/YCbCr4: 2:2 RGB565/555/444 GRB4: 2:2 Raw RGB Data
Optical size: 1/6 "
Maximum Zhen rate: 30fps VGA
Sensitivity: 1.3V / (Lux-sec)
SNR: 46 dB
Dynamic range: 52 dB
View Mode: Progressive
Pixel Size: 3.6μm x 3.6μm
Dark current: 12 mV / s at 60 ¿¿¿
High sensitivity suitable for illumination applications
Low voltage suitable for embedded applications
Standard SCCB interface compatible with I2C interface
Additional Information: