Universal USB Programmer

Product Details:

UPA Usb Programmer Diagnostic-tool UPA-USB ECU Programmer UPA USB V1.3 Full A
dapter 
EEPROM
Simply connect the mainboard to the UPA programmer directly or by using a DB9 male / female extension cable (1:1). Insert the correct config key into the slot of the mainboard and start programming either via the ZIF or SOIC Socket. You can also use the included DIL to 10pin Flat-ribbon header, put it inside the ZIF socket and wire up an SOIC clip or clamps for ISP use from there.
Motorola MCU's
Pick the Adapter you want to use, attach the flat cable to the Adapter (PIN1 is always indicated, on both the cable and also the Adapter) and also to the main board's 10pin ISP connector. Select the VCC supply source by the jumper on the mainboard next to the ISP connector (on = target supplied from upa, off = target got own supply). Slide the Adapter over the soldered PLCC MCU on the target PCB. (No soldering, no pinout reviewing, no pin counting, saves lots of time and hassle and let's you make your job faster, precise and easier)Once your workshop is equipped with our Adapter Set you will have a all new UPA Experience.
STMicroelectronics ST62*:ST6240, ST6245, ST6249NSC CR16*: CR16HCS5(9), CR16MCS5(9), CR16MES5(9), CR16MFS5(9), CR16MCT5/9, CR16HCT5/9
for Motorola HC05*: MC68HC05B6, MC68HC05B8, MC68HC05B16, MC68HC705B16, MC68HC05B32, MC68HC05E6, MC68HC705E6, MC68HC05H12, MC68HC05L28, MC68HC05P3, MC68HC705P3*,MC68HC05X16, MC68HC05X32
for Motorola HC08*: MC68HC08AS20, MC68HC08AS32, MC68HC08AS60, MC68HC08AZ32, MC68HC(9)08AZ32A, MC68HC908AZ60, MC68HC908AZ60A
for Motorola HC11*: MC68HC11A1, MC68HC11A8, MC68HC11E9, MC68HC11EA9, MC68HC11E20, MC68HC11F1, MC68HC11K4, MC68HC11KA2, MC68HC11KA4, MC68HC11KG4, MC68HC11KS2, MC68HC11KS8, MC68HC11L6, MC68HC11P2, MC68HC11PA8, MC68HC11PH8
for Motorola HC12*: MC68HC912B32, MC68HC912BE32, MC68HC912D60, MC68HC912D60A, MC68HC912DC128A, MC68HC912DG128, MC68HC912DG128A
for Motorola HCS12*: MC9S12D64, MC9S12A128, MC9S12DG128, MC9S12DG256, MC9S12H128, MC9S12H256
Atmel 8051 Architecture: AT89S51, AT89S52, AT89S53, AT89S8252, AT89S8253
Atmel AVR 8-Bit Risk: AT90S1200, AT90S2313, AT90S2323, AT90S2333, AT90S2343, AT90S4433, AT90S4434, AT90S8515, AT90S8535, ATmega8, ATmega16, ATmega161, ATmega162, ATmega163, ATmega323, ATmega64, ATmega103, ATmega128, ATtiny12, ATtiny15, ATtiny2313Microchip PIC12: PIC12F508, PIC12F509, PIC12F629, PIC12F675
Microchip PIC16: PIC16F627(A), PIC16F628(A), PIC16F648A, PIC16F72, PIC16F73, PIC16F74, PIC16F76, PIC16F77, PIC16F818, PIC16F819, PIC16F83, PIC16F84(A), PIC16F870, PIC16F871, PIC16F872, PIC16F873(A), PIC16F874(A), PIC16F876(A), PIC16F877(A)EEPROMs I2C: 24C01, 24C02, 24C04, 24C08, 24C16, 24C32, 24C64, 24C65, 24C128, 24C256, 24C512, 85C72, 85C82, 85C92, BAW574252, GRM-003, GRM-004, GRM-005, KKZ-06F, MCM2814, PCA8581, PCF8581, PCF8582, PCF8594, PCF8598, PCF85102, PCF85116, SDA2516, SDA2526, SDA2546, X24C00, X24C01
EEPROMs Microwire: 7002, 93C06, 93C14, 93C46, 93C56, 93C57, 93C66, 93C76, 93C86, 93S46, 93S56, 93S66, GRN-001, GRO-002, KKZ-01, S220, S2914, ST61907, XLS93C46
EEPROMs SPI: M35080, 25C010, 25C020, 25C040, 25C080, 25C128, 25C160, 25C256, 25C320, 25C640, M25P05, M25P10, M25P20, M25P40, M25P80, ST95010, ST95020, ST95040, ST95080, ST95160, ST95320, ST95640, ST95P02, ST95P04, ST95P08, X5043, X5045
EEPROMs Miscellaneous: CXK1011, CXK1012, CXK1013, M6M80011, M6M80021, M6M80041, SDE2506, TC89101, TC89102
*EEPROM OnlyNEC ..uDP780828A uDP780948 uDP780949 uDP780973 uDP780974TMS...TMS370CX02 TMS370CX32 TMS370CX36 TMS370CX42 TMS370CX56 TMS370CX56 TMS370CX56 78K0/HC912TMS370CX58 TMS370CX58 78K0/HC912 TMS375C006

Product Details:

Support 2.5~6.5V device Adopting USB interface power supply as well as 5V external power supply (Power supply included) Transmission speed 12mhz/s via USB,Support 64M Mass Storage Facility, Compatible with Notebook or Desktop computer, Device's connection inspection, inspect every pins' connection of the device, With current protection function, effectively protects the programmer and devices. Device's connection inspection, inspect every pins' connection of the device 48 pins self-lock sockets, Working with WINDOWS 2000/2003/XP/Vista/WINDOWS7 (32bit),The programming speed has nothing to do with the computer's CPU speed Plastic cabinet, Small size and Weight light.

PACKAGE LIST

TOP3100 universal programmer 1 pcs
USB 2.0 cable (USB 1.1 compatible) 1 pcs
5V/2A AC adapter (spare part) 1 pcs
TopWin software CD 1 pcs

Additional Information:

• Item Code: OMP-P015

Product Details:

Support 2.5 ~ 6.5V device, You can either use the USB interface power, but also the external 5V power supply, Through USB universal serial port connected to PC, transfer rate of 12MHz / s,That is suitable for battery-powered notebook computer use, also suitable for desktop use, Perfect over-current protection, effective protection against damage and device programmer, USB load capacity detection (0-10),Full pin check, you can check out the status of any contact with a pin of,40-pin imported universal locking socket Running under WINDOWS XP / WIN7 / WIN8 / WIN10,Plastic casing, small size, light weight, low power consumption, Automatic detection of manufacturers and models, MCU timer, programming speed has nothing to do with the computer.
PACKAGE INCLUDES: TOP2013 PROGRAMMER,CABLE,CD,PLCC44 Adapter

Additional Information:

• Delivery Time: 1 to 2 days

Product Details:

The TOP3000 programmer has compact size, low power consumption, high reliability. This is universal equipment especially designed for MCU and EPROMs programming. The high transmission speed between TOP3000 with PC is realized via USB and don't need external power supply.

FEATURES

• Support 2.5V to 6.5V device.
• Selectable to use USB or external 5V power supplier to supply power.
• Transmission speed is 12MHz/s.
• Suitable to work with Desktop or Laptop.
• With current protection function, effectively protects the programmer and devices.
• 48 pins selflock sockets;
• Support operation system WINDOWS7/vista/2000/2003/XP;
• Plastic cabinet, small size and light weight.
• Auto detects company and type of the IC.
• Software support TopWin ver6.0 or newer.
Performance and parameters
• Software TopWin (for Windows98se/2000/me/xp)
• Actual tested Speed(PIII/800M, Windows98se,USB1.1)
o 28F320 write and check 104 seconds
o 29LF320 write and check 112 seconds
o p89c58 write and check 5 seconds
• Size 155*110*26
• Weight for the programmer only 275g
• Power < 2.5W (5V/500mA)
• 48 Pin selflock socket (Changeable)

Additional Information:

• Item Code: OMP-P014
• Delivery Time: 1 to 2 days

Product Details:

Support 2.5 ~ 6.5V device, You can either use the USB interface power, but also the external 5V power supply, Through USB universal serial port connected to PC, transfer rate of 12MHz / s,That is suitable for battery-powered notebook computer use, also suitable for desktop use, Perfect over-current protection, effective protection against damage and device programmer, USB load capacity detection (0-10),Full pin check, you can check out the status of any contact with a pin of,40-pin imported universal locking socket Running under WINDOWS XP / WIN7 / WIN8 / WIN10,Plastic casing, small size, light weight, low power consumption, Automatic detection of manufacturers and models, MCU timer, programming speed has nothing to do with the computer.
PACKAGE INCLUDES: TOP2013 PROGRAMMER,CABLE,CD,PLCC44 Adapter

Additional Information:

• Item Code: OMP-P049
• Delivery Time: 1 to 2 days

Product Details:

Support 2.5 ~ 6.5V device, You can either use the USB interface power, but also the external 5V power supply, Through USB universal serial port connected to PC, transfer rate of 12MHz /s, That is suitable for battery-powered notebook computer use, also suitable for desktop use, Perfect over-current protection, effective protection against damage and device programmer, USB load capacity detection (0-10) Full pin check, you can check out the status of any contact with a pin of 40-pin imported universal locking socket. Running under WINDOWS XP / WIN7 / WIN8 / WIN10,Plastic casing, small size, light weight, low power consumption, Automatic detection of manufacturers and models, MCU timer, programming speed has nothing to do with the computer.

Product Details:

1 IntroductionThe EV2500 EVM interface board enables an IBM-compatible or other type PC (with the required driverfor its particular platform) to communicate with the Texas Instruments SMBus and I2C interface gasgauges via a Universal Serial Bus (USB) port. In addition to this board, PC software is required to interpretthe gas gauge data to complete the evaluation system.1.1 Features• Fully powered from the USB port• Optional 5-V port for powering high-power voltage drivers (future upgrade)• Complete interface between the USB and SMBus or I2C interfaces using a simple API• Expansion port for future upgrades1.2 Kit Contents• EV2500 circuit module• Standard USB cable
EVM Part NumberEV25002 InterfacesThe EV2500 interfaces are described in the following table. The reference designators on the circuit boardand the functions are also listed.Reference Designator Function DetailsPort 1: SMB SMBus Interface Port Terminal block for connecting to a targetdevicePort 2: I2C I2C Interface Port Terminal block for connecting to a targetdevicePort 3: HDQ HDQ Interface Port Terminal block for connecting to a targetdevicePort 4 Single Wire Port Future expansion portPort 5 GPIO Port Future expansion port

Product Details:

Hardware features
 USB Type-C communication interface, no need for external power supply when used in USB mode;
 Support USB mode mass-production programming: automatically detects the chip insert and remove,and
automatically starts programming; (Note: SP10A does not have this function)
 Support standalone programming: no need to connect to a computer when programming, built-in large-size
memory saves the project data, multiple CRC data validation ensures that the programming data is absolutely
accurate; (Note: only SP10F has this function)
 28-pin ZIF socket, universal programming sockets are supported;
 RGB three-color LED indicates the working status, the SP10F can also indicate the success and failure via a
buzzer;
 Support poor pin contact detection, effectively improve programming reliability;
 Short circuit / overcurrent protection function can effectively protect the programmer or chip from accidental
damage;
 Programmable voltage design, adjustable range from 3.3V to 5.0V, can support 3.3V-5V chips;
 Provide equipment self-check function;
 Small size (size: 108x76x21mm), simultaneous programming of multiple machines only takes up a very small
work surface;

Software features
 Support Win7/Win8/Win10/Win11;
 Support switching between Chinese and English;
 Support software upgrade to add new devices;
 Support project file management (project file saves all programming parameters, including: chip model, data
file, programming settings, etc.);
 Support the reading and writing of additional storage area (OTP area) and configuration area (status register,
etc.) of the chip;
 Support automatic recognition of 25 series SPI FLASH;
 Automatic serial number function (can be used to generate product unique serial number, MAC address,
Bluetooth ID, etc.,);
 Support multi-programmer mode connection: one computer can be connected with 8 SP10B/SP10F
programmers for simultaneous programming,The automatic serial number function is active in multiprogrammer mode; (Note: SP10A does not have this function)
 support 8 SP10F to download standalone data at the same time;
 Support log file saving;

Additional Information:

• Delivery Time: 15 to 17 days

Product Details:

Description

SP20 series (SP20B/SP20F/ SP20X/SP20P) programmers are the latest high speed mass production programmers for SPI FLASH launched by Shenzhen SFLY Technology. It fully supports the high-speed programming of SPI NOR / NAND FLASH, I2C / MicroWire and other EEPROMs from domestic and foreign manufacturers.

Hardware features

??? USB TYPE-C communication interface, no need for external power supply when used in USB mode;
??? Support USB and standalone mode high-speed mass production programming;
??? Replaceable 28-pin ZIF socket, which can be supported by conventional universal programming bases;
??? RGB three-color LED indicates the working status, and the buzzer can prompt the success and failure of the programming;
??? Support poor pin contact detection, effectively improve programming reliability;
??? Support ISP mode programming, which can support on-board programming of some chips;
??? intelligent detection chip placement and removal, automatic startup programming;
??? Short circuit / over current protection function can effectively protect the programmer or chip from accidental damage;
??? Programmable voltage design, adjustable range from 1.7V to 5.0V, can support 1.8V/2.5V/3V/3.3V/5V chips;
??? Provide equipment self-check function;
??? Small size (size: 108x76x21 mm), simultaneous programming of multiple machines only takes up a very small work surface;

Software features

??? Support Win7/Win8/Win10/Win11;
??? Support software upgrade to add new devices;
??? Support project file management (project file saves all programming parameters, including: chip model, data file, programming settings, etc.);
??? Supports project file lock and read-only attributes to prevent operators from setting programming parameters by mistake;
??? Support multi-computer connection: one computer can be connected with 8 SP20 series programmers for simultaneous programming;
??? Support the reading and writing of additional storage area (OTP area) and configuration area (status register, etc.) of the chip;
??? Support some SFDP content reading of SPI FLASH;
??? Automatic serial number function (can be used to generate product unique serial number, MAC address, Bluetooth ID, etc., support automatic increment and file mode).

Packing list

SP20B High-speed Programmer
C-Type Data Cable
ISP Cable
Instruction Manual

Additional Information:

• Delivery Time: 1 to 2 days